25-Nov-2022, 02:19 PM (This post was last modified: 25-Nov-2022, 03:16 PM by SnowLeopardFPV. Edit Reason: Added "EDIT" line. )
This is a repost of a statement issued by Ian (Mads Tech) yesterday regarding new v01.00.06.07 firmware for the DJI FPV Goggles V2. This firmware update is only for the V2 goggles and doesn't exist for or apply to the V1 goggles.
Unfortunately the whole dual firmware thing on V2 goggles is a complete minefield and even updating one of the firmwares can have an adverse effect on the other firmware so be extremely cautious when upgrading either firmware if you want to keep any fpv.wtf root hack / WTFOS functionality.
Source (YouTube Community Post): https://www.youtube.com/post/UgkxAuDihmR...k6ROzJhb03
EDIT: Release notes for the v01.00.06.07 firmware added below...
Source (DJI Forum): https://forum.dji.com/forum.php?mod=view...tid=276729
Unfortunately the whole dual firmware thing on V2 goggles is a complete minefield and even updating one of the firmwares can have an adverse effect on the other firmware so be extremely cautious when upgrading either firmware if you want to keep any fpv.wtf root hack / WTFOS functionality.
Source (YouTube Community Post): https://www.youtube.com/post/UgkxAuDihmR...k6ROzJhb03
Mads Tech Wrote:DJI have published a new firmware for the DIY mode ie for use with the vista and DJI Air-unit on the Goggles V2 with the version number 01.00.0607 that blocks the FPV.WTF Root Hack and WTFOS.
If you update to this you will not be able to downgrade and you will not be able to root or install the WTFOS.
If you have already rooted and upgrade we believe you may be ok and it will still work however it’s not something you should risk.
Just to note the Goggles V2 have multiple firmware stacks and the drone and FPV side are separate and are updated separately. This does not affect the update to V01.04.0000 for the DJI O3 Air unit in drone mode on the v2 goggles and you are still safe to update to this FW for use with O3 but you should again perform any root hacks in advance.
Again in DIY Mode on the Goggles V2 do not update via assistant 2.
This applies to DJI Goggles V2 only.
EDIT: Release notes for the v01.00.06.07 firmware added below...
Source (DJI Forum): https://forum.dji.com/forum.php?mod=view...tid=276729
DJI Wrote:Release Notes
Overview:What's New?
- Date: 2022.11.22
- Air Unit Firmware: v01.00.06.08
- Goggles V1 Firmware: v01.00.06.08
- Goggles V2 Firmware: v01.00.06.07
- Remote Controller Firmware: v01.00.06.08
- DJI Assistant 2 (Consumer Drones Series): v2.1.14
Notice:
- Added support to use DJI FPV Goggles V2 with DJl Avata. Tap Settings then Device and select Switch to DJI Avata.
- Restart the air unit, goggles, and remote controller once the update is complete.
- If the firmware update fails, restart the device and DJI Assistant 2 (Consumer Drones Series), and try updating again.
- Goggles must be manually restarted each time after switching system.
- To switch goggles back to DJI Digital FPV System from DJI FPV or DJI Avata, tap Settings then About and select Switch to DJI Digital FPV System.
- Update the Air Unit (Lite) when there is good ventilation. Make sure that both the goggles and remote controller are powered off before updating the Air Unit (Lite). DO NOT touch the Air Unit (Lite) during update since the temperature rises. If update fails, wait for the Air Unit (Lite) to cool down and try to update again.