So my first build failed and i still have all the parts like goggles, controller, batteries, battery charger so was looking to pick up a pre built 6 inch quad which takes 1300MAH 6S battery. Any suggestions and im based in the uk. Thanks in advance
First build failed need a new quad |
What failed on the first build? 'Ignore' is the route word of Ignorant. 07-Sep-2020, 05:39 PM (07-Sep-2020, 04:51 PM)bLoWsMokE Wrote: What failed on the first build? https://intofpv.com/t-fc-and-receiver-no...betaflight - this is what happened bought a new fc and still none of the lights come on when i plug the battery in but the lights come on when i connect the drone to my pc 07-Sep-2020, 08:36 PM Got any "close up" pictures of your drone, particularly the stack, and the battery lead connections. 07-Sep-2020, 08:42 PM With a LiPo plugged in (preferably while using a Smoke Stopper), use a multimeter to check you are getting LiPo voltage between the V(BAT) pin and a GND point, and 5V between the 5V pin and a GND point of the ESC connector pins on the FC... 07-Sep-2020, 09:10 PM (07-Sep-2020, 08:42 PM)SnowLeopardFPV Wrote: With a LiPo plugged in (preferably while using a Smoke Stopper), use a multimeter to check you are getting LiPo voltage between the V(BAT) pin and a GND point, and 5V between the 5V pin and a GND point of the ESC connector pins on the FC...ahh thank you will try this tommrow and see what result i get 08-Sep-2020, 11:04 AM a tyro119 could be a inexpensive beginner build with the ability to handle 6s. hopefully you can get your fc working. 08-Sep-2020, 11:51 AM @hugnosed - The OP currently has a Tyro119. This is what he/she has replaced this particular flight controller on. I guess another complete Tyro119 would be an option if the OP hasn't already lost trust in the quality of the components used for that build. I wonder if he's just plugging in the wiring harness but the wires don't match up right......... Sometimes you have to rewire the plug itself. Although come to think of it, I'm sure the others who asked what the FC was and what the FC was made sure that wasn't the case first.... But just in case . Click . V 'Ignore' is the route word of Ignorant. 08-Sep-2020, 06:15 PM (07-Sep-2020, 05:39 PM)mahek0 Wrote: https://intofpv.com/t-fc-and-receiver-no...betaflight - this is what happened bought a new fc and still none of the lights come on when i plug the battery in but the lights come on when i connect the drone to my pc I had a similar problem. Bought a new FC+ESC stack after burning the previous one in the quad. When I changed it and connected the lipo, nothing happened. When I plugged the USB to the FC, the diodes worked normally. The next day I swapped the cable ( there was 2 cables in the package) between FC and ESC and everything start magically working. I tought I burnt all components with previous FC but the problem was in the cable. |
« Next Oldest | Next Newest » |
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
First Build - GPS help in BF 4.5.0 | gearsmithy | 12 | 245 | Yesterday, 11:46 PM Last Post: mstc | |
GPS Rescue Failed, Drone lost | cycloholic | 12 | 276 | 08-Jun-2024, 12:44 PM Last Post: SnowLeopardFPV | |
Drone Build List for Beginner | martyxfly | 6 | 2,050 | 07-Jun-2024, 07:59 AM Last Post: joe.x | |
Quad turing green | Scro | 7 | 238 | 17-May-2024, 07:27 PM Last Post: peveleigh | |
Firts build trouble | HotsauceExe | 3 | 120 | 17-May-2024, 06:13 PM Last Post: Pathfinder075 |