Posts: 60
Threads: 22
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Jan 2016
Reputation:
5 The power connector has come off my vtx aomway 200mw.
Does anybody know where I can solder the power wires as the solder pads have come off also. Thanks.
I love to share and help people! Flying Mini Quad is the best!
• Posts: 72
Threads: 19
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2016
Reputation:
2 There's a but of metal still showing on that pad test with multimeter to pads on the top. If it ls the power. Then neg can do to Sam is I soldered mine to. They will be shared ground
Not sure you'll get continuity from that smidgen of pad, maybe scratch back the pcb from above the pads to se if theres some trace
• Posts: 93
Threads: 25
Likes Received: 6 in 5 posts
Likes Given: 3
Joined: Jan 2016
Reputation:
4 solder the positive wire on the right side terminal of the SS14 diode (the black rectangular part on top of your ripped power connector). negative wire can be on the soldered leg of the sma connector.
• Posts: 60
Threads: 22
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Jan 2016
Reputation:
5 (21-Feb-2016, 01:24 AM)CurryCat Wrote: solder the positive wire on the right side terminal of the SS14 diode (the black rectangular part on top of your ripped power connector). negative wire can be on the soldered leg of the sma connector.
Fixed it!
Thank you much appreciated
I love to share and help people! Flying Mini Quad is the best!
•