(06-Apr-2021, 04:04 AM)voodoo614 Wrote: The scroll wheel only changes values and navigation through the radio menu. You need to go to the Output page in your radio and adjust the endpoints there.

https://oscarliang.com/adjust-tx-channel-mid-end-point/

That's where I'm at.

I've adjusted the stick outputs on my radio before with an frsky rx before without any issues.

I know you said you can't change the output. Can you post a photo or video of your problem. I am not seeing the big picture.

If things are not working, recalibrating your stick again. Then adjusting the endpoints.

(06-Apr-2021, 08:42 AM)voodoo614 Wrote: I know you said you can't change the output. Can you post a photo or video of your problem. I am not seeing the big picture.

If things are not working, recalibrating your stick again. Then adjusting the endpoints.

I'll try and get a pic. I can adjust the the endpoints on radio but it is not reflecting in the reciever tab in betaflight. In output tab in radio I can once click the wheel, scroll left or right and the bars on the betaflight screen do not move. I can move the sticks and the bars will move accordingly but when I click, scroll and try to move the cars on screen with scroll wheel they do not move.

To clarify that last sentence. I’m in the output tabs on radio, receiver tab in beta flight, and trying to adjust mid and end points.

So what you are saying that you can see the value in the output page changes (example from the default -100 or 100) to something else, but Betaflight receiver tab is not reflecting the changes. How high or low have you changed the value? Even with max allowed value change, you still can't see a change? A lot of the times, make sure that all your trim are centered. Do a stick calibration and then try the endpoints adjustment if you need it.

(06-Apr-2021, 07:10 PM)voodoo614 Wrote: So what you are saying that you can see the value in the output page changes (example from the default -100 or 100) to something else, but Betaflight receiver tab is not reflecting the changes.  How high or low have you changed the value?  Even with max allowed value change, you still can't see a change?  A lot of the times, make sure that all your trim are centered.  Do a stick calibration and then try the endpoints adjustment if you need it.

that is exactly what I'm saying. Even max value zero change

Why don't you try what suggested.

(06-Apr-2021, 12:35 AM)SnowLeopardFPV Wrote: What do you mean by can't adjust stick outputs? Do you mean you aren't seeing any of the bars moving in the Receiver tab when you move the sticks? If so then please tell us what receiver you have and whether it is bound to your transmitter. Then run both the "dump" and "diff all" commands in the Betaflight Configurator CLI tab and copy/paste the results back here, and post some good clear photos of the actual wiring and connections between your receiver and flight controller.

I am having this problem also jus got the mobula6hd 3 days ago ...the quad with the nano xf and my tango 2 are both green video works ...but in beta flight it doesn’t show that my sticks are moving when I move them like it does with my other quad ....and when I type status in bf it says rxloss but is still showing green on both ....any help would be greatly appreciated

(06-Apr-2021, 11:46 PM)voodoo614 Wrote: Why don't you try what suggested.

done

I'll keep trying. Thanks for the help guys!

Still not working?

(07-Apr-2021, 07:03 AM)voodoo614 Wrote: Still not working?

Alas no. Lol. Guess I’ll just have to deal with it.

(07-Apr-2021, 07:03 AM)voodoo614 Wrote: Still not working?

Thanks for your help. I just find it odd. There has to be some way.

Can you post a dump and diff all file? And post some photos of the output page on radio and receiver tab on BFC?