Posts: 482
Threads: 54
Likes Received: 174 in 127 posts
Likes Given: 306
Joined: Apr 2023
Reputation:
11 Most likely reason is firmware on vtx doesn't match firmware on goggles. Flash both to the newest firmware.
The following 1 user Likes FPVme's post:1 user Likes FPVme's post • niuk Posts: 295
Threads: 128
Likes Received: 5 in 5 posts
Likes Given: 254
Joined: May 2021
Reputation:
1 I have vtx on 1.3 and latest 9.1 on goggles
• Posts: 295
Threads: 128
Likes Received: 5 in 5 posts
Likes Given: 254
Joined: May 2021
Reputation:
1 Maybe that UART4 (says for GPS...in doc) can't do MSP ? I saw people have RX on UART4 and VTX on UART3 on this FC
• Posts: 6,157
Threads: 172
Likes Received: 2,297 in 1,844 posts
Likes Given: 4,753
Joined: Feb 2019
Reputation:
103 any uart should be able, only a firmware issue could give, source conflict could cause something, thats very rare.
how did you enable display port, did you choose "hdzero preset" to enable displayport?
if not, give it a try - it would do the -1 math for displayport for you.
Posts: 295
Threads: 128
Likes Received: 5 in 5 posts
Likes Given: 254
Joined: May 2021
Reputation:
1 I am doing "set displayport_msp_serial" but it gives me hard time, can't remember after save etc
• Posts: 6,157
Threads: 172
Likes Received: 2,297 in 1,844 posts
Likes Given: 4,753
Joined: Feb 2019
Reputation:
103 11-Sep-2023, 02:51 AM (This post was last modified: 11-Sep-2023, 02:52 AM by hugnosed_bat.) it does also enable hd osd same time by applying the hdzero preset in bfc.
do get osd that way?
if you go to the osd tab and cant enable hd osd, get sure you didnt custom build the firmware and disabled "hd osd".
i did that on a buddies quad xD remember such things can be difficult xD
if you didnt get it, provide an image of your wireing, maybe there is rx and tx wrong attached?
Posts: 295
Threads: 128
Likes Received: 5 in 5 posts
Likes Given: 254
Joined: May 2021
Reputation:
1 hd presets didn't help, is it possible to have video but no OSD with rx and tx wrongly attached ?
• Posts: 6,157
Threads: 172
Likes Received: 2,297 in 1,844 posts
Likes Given: 4,753
Joined: Feb 2019
Reputation:
103 12-Sep-2023, 03:40 PM (This post was last modified: 12-Sep-2023, 03:43 PM by hugnosed_bat.) yes - check that again ;-)
you dont need a flightcontroller to use hdzero, you can mount it on an rc car as example.
a buddy soldered rx and tx wrong :-)
manufacturers does sometime show tx or rx, aometimes they show where it has to be soldered on fctx or fcrx, hdzero does display all of them xD but there comes mistakes from the different sort informations by manufacturers.
Posts: 6,157
Threads: 172
Likes Received: 2,297 in 1,844 posts
Likes Given: 4,753
Joined: Feb 2019
Reputation:
103 was you able to solve it?