A new configurator update, enhancments.
ExpressLRS Configurator 1.4.1
Changelog
A new configurator update, enhancments.
ExpressLRS Configurator 1.3.11
[color=var(--color-fg-muted)]released this 5 days ago[/color]
Changelog
I like the new Update method, It asks if you want to download, and does.
ExpressLRS Configurator 1.3.10
[color=var(--color-success-fg)]Latest
[/color]
Changelog
A new configurator update, enhancments.
ExpressLRS Configurator 1.3.9
Changelog
A new configurator update, targets and bugfix
ExpressLRS Configurator 1.3.8
Changelog
Actually, these changes were from 1.3.7 not much in 1.3.8
A new configurator update, targets and bugfix
ExpressLRS Configurator 1.3.6
Changelog
A new update for the configurator. A bunch of new hardware support and some bugfixes
ExpressLRS Configurator 1.3.4
Changelog
New update for the configurator
ExpressLRS Configurator 1.3.3
Changelog
New update for the configurator
ExpressLRS Configurator 1.3.2
Changelog
A new update for the configurator. More new targets and enhancements to the configurator.
ExpressLRS Configurator v1.2.5
Changelog
A new update for the configurator. new targets and enhancements to the configurator.
ExpressLRS Configurator v1.2.4
Changelog
A new Firmware update. This is a Release Candidate and not proven stable only use if it has features you need now.
ExpressLRS V2.0.0 Release Candidate 2
Update for the configurator. Bugfix and target
ExpressLRS Configurator v1.2.3
[color=var(--color-fg-muted)] github-actions released this 4 days ago
· 17 commits to master since this release
v1.2.3[/color]
Changelog
ExpressLRS Configurator v1.2.1
[color=var(--color-success-fg)]Latest
[/color]
[color=var(--color-fg-muted)] github-actions released this 20 hours ago
v1.2.1
[/color]
[/url]
Changelog
A new update for the configurator. Mostly new targets.
ExpressLRS Configurator 1.4.1
Changelog
A new configurator update, enhancments.
ExpressLRS Configurator 1.3.11
[color=var(--color-fg-muted)]released this 5 days ago[/color]
Changelog
I like the new Update method, It asks if you want to download, and does.
ExpressLRS Configurator 1.3.10
[color=var(--color-success-fg)]Latest
[/color]
Changelog
- Change RX24T to be an alias of BetaFPV 2400 RX #304
- Add BetaFPV pwm and seperate Lite from Nano #307
- Rename BetaFPV nano targets (from BETAFPV_2400_RX to BETAFPV_Nano_2400_RX) #308
- Display error message when network device target can't be selected #313
- Add save build log #293
- Add generic build error message #292
- Add copy logs button #291
- Warn about unplugging power to soon when flashing via WI-FI #290
- Update description about EU CE 2.4 GHz mode #294
- Upgrade serialport to 10.4.0 #296
- Disable Linebreak Style Rule #299
- Upgrade test workflow to use node 14.17.6 #298
- Disable warn for console.error() #302 (community contribution from @parkerbjur)
- Network Device Monitor Update #305
A new configurator update, enhancments.
ExpressLRS Configurator 1.3.9
Changelog
- Enable Electron Auto Updater on Windows #287
- Add Force Upload Support #281
- Add alias for Namimno OLED backpack #284
- Adds the HM EP82 backpack target #283
A new configurator update, targets and bugfix
ExpressLRS Configurator 1.3.8
Changelog
Actually, these changes were from 1.3.7 not much in 1.3.8
- Add RadiomasterRC 2.4 GHz RX targets #265
- Fixed Windows backpack build issues #261
- Improve navigation across firmware data tabs #266
- Add Skystars SS24D diversity receiver #259
- Add BetaFPV backpack device #213
- Git based loading of target and user defines fixes #262
- Remove UNLOCK_HIGHER_POWER from BetaFPV TX 1W module #273
- Display warning for users if they are trying to flash outdated custom BetaFPV #274
A new configurator update, targets and bugfix
ExpressLRS Configurator 1.3.6
Changelog
- Upgrade platformio installer to 1.1.0 #254
- Add support for Jumper_AION_2400_T-Pro_TX_via_ETX target #256
- Fix windows issue where incorrect python version was picked by platformio
- Fix issue when configurator was not able to clear platformio files when platformio installation is broken
A new update for the configurator. A bunch of new hardware support and some bugfixes
ExpressLRS Configurator 1.3.4
Changelog
- Add RadioMaster Zorro internal 2.4 GHz module support #226
- Add RadioMaster Zorro TX Backpack support #235
- Add support for EdgeTxPassthrough flashing method, DUPLETX DIY hardware #217
- Hide HOME_WIFI_SSID, HOME_WIFI_PASSWORD, MY_BINDING_PHRASE and MY_UID from UI logs
- Fixed documentation links #210. (Thanks @dimitroffs!)
- Add Vantac 2.4 GHz TX & RX targets #221
- Add Jumper 2.4 GHz AION Nano TX Module #220
- Add Jumper T-Pro internal 2.4 GHz module support #238
- Remove REGULATORY_DOMAIN_EU_CE_2400 from devices that do not support 10mw #237
- Add Rx5808 esp01f backpack targets #236
- Fix network device select issue #228
- Sort category and device drop-downs alphabetically #225
- Default AUTO_WIFI_ON_INTERVAL to 60
- Rename "BETAFPV 2400 TX" to "BETAFPV 2400 TX Nano"
New update for the configurator
ExpressLRS Configurator 1.3.3
Changelog
- Merge network device options with default options #155
- Do not store sensitive data (binding phrase, wifi credentials) inside application logs #168
- Do not display sensitive data in the UI by default #171, #187
- New device definition structure #172
- Warn users about USE_DIVERSITY misuse #174
- Gracefully handle corrupted git repository state #175
- Add support for REGULATORY_DOMAIN_EU_CE_2400 #177
- Wiki url versioning #178
- Enable DIY ESP32 based hardware WiFi flashing #188
- Add betaFPV 2.4 micro 1000mw target #189
- Bugfix: build options not visible when reselecting target #193
- Add TBS Fusion backpack support #198
- Disable wifi device alerts during build #204
- Add FAN_MIN_RUNTIME #207
New update for the configurator
ExpressLRS Configurator 1.3.2
Changelog
- Fix long device names in lua
- Merge network device options with default options
A new update for the configurator. More new targets and enhancements to the configurator.
ExpressLRS Configurator v1.2.5
Changelog
- Add support for DIY_BLE_JOYSTICK once merged upstream #122
- Add USE_TX_BACKPACK support to R9M TX target #132
- Add DISABLE_ALL_BEEPS support #131
- iFlight 2.4 GHz Tx and Rx targets #133
A new update for the configurator. new targets and enhancements to the configurator.
ExpressLRS Configurator v1.2.4
Changelog
- Point to correct LUA script version based on selected firmware source (#121)
- Store regulatory domain and WIFI settings at the global scope (#129)
- Join HappyModel ES900 and HappyModel 915 Mhz categories (#127)
- Add MATEK_2400_RX_PWM target support (#123)
- Display target load error messages (#124)
- Add support for DIY_900_RX_ESP8285_SX127x_via_WIFI target
- Update ExpressLRS wiki link to ExpressLRS.org (#119)
- Add DIY PWMP targets
A new Firmware update. This is a Release Candidate and not proven stable only use if it has features you need now.
ExpressLRS V2.0.0 Release Candidate 2
- Prevent going to 1:2 ratio when disconnected and entering Lua (#1092)
- Do not process start wifi on stm32 (#1099)
- Use two param popupConfirmation on FreedomTX (#1096)
- No reason to clear IRQ flags manually (#1086)
- Fix LUA render on NV14 (#1091)
- Shorten Namimno OLEDs to 15 chars (#1093)
- Prevent crash when using BACK item when lua is reloading (#1080)
Update for the configurator. Bugfix and target
ExpressLRS Configurator v1.2.3
[color=var(--color-fg-muted)] github-actions released this 4 days ago
· 17 commits to master since this release
v1.2.3[/color]
Changelog
- Bugfix: configurator fails to open backpack firmware binary location in file explorer
- Add DIY 900 MHz PWMP and DIY 2.4 Ghz PWMP RX support
ExpressLRS Configurator v1.2.1
[color=var(--color-success-fg)]Latest
[/color]
[color=var(--color-fg-muted)] github-actions released this 20 hours ago
v1.2.1
[/color]
[/url]
Changelog
- Add USE_TX_BACKPACK support for DIY targets
A new update for the configurator. Mostly new targets.
- ExpressLRS Configurator v1.1.0
[color=var(--color-success-fg)]Latest
[/color]
[color=var(--color-fg-muted)] github-actions released this 3 days ago
· 7 commits to master since this release
v1.1.0[/color]
[/url]
Changelog- New JSON based targets configuration ([url=https://github.com/ExpressLRS/ExpressLRS-Configurator/pull/73]#73)
- Add Matek 2400 RX support (#79)
- Add Matek 2400 RX wiki url (#81)
- Add DRCVR_INVERT_TX user define support (#72)
- Add RCVR_UART_BAUD user define support (#85)
- Add FM30_RX_MINI_AS_TX device support (#87)
- Flash devices connected to your home network (#93)
- Add QuadKopters 2.4 Ghz Slim Tx support (#98)
- Support removal ISM_2400 regulatory user define (#96)
- New JSON based targets configuration ([url=https://github.com/ExpressLRS/ExpressLRS-Configurator/pull/73]#73)
- A new firmware update is available , nothing new on the configurator.
ExpressLRS V1.2.0 Release
[color=var(--color-fg-muted)] AlessandroAU released this 17 hours ago[/color]
ExpressLRS V1.2.0 Release Notes
The important stuff- Arming must be on AUX1 for safety and feature reasons, having this fixed allows us to maintain small packet sizes and deliver better aux channel options
- Be sure to flash both the TX and RX
expresslrs.org/quick-start/
- Arming must be on AUX1 for safety and feature reasons, having this fixed allows us to maintain small packet sizes and deliver better aux channel options
- A new update is available for ExpressLRS Configurator.
ExpressLRS Configurator v1.0.8
[color=var(--color-fg-muted)] github-actions released this 3 days ago[/color]
Changelog- Only show targets that exist in the currently selected source #71 (community contribution from @justinlampley)
- Hotfix: QuadKopters_JR_2400_TX was using DIY_2400_RX_ESP8285_SX1280 configuration instead of DIY_2400_TX_ESP32_SX1280 by mistake
- Only show targets that exist in the currently selected source #71 (community contribution from @justinlampley)
- ExpressLRS Configurator v1.0.7
[color=var(--color-text-secondary)] github-actions released this yesterday[/color]
Changelog- Add QuadKopters_JR_2400_TX and QuadKopters_NANO_RX targets #70
- Add QuadKopters_JR_2400_TX and QuadKopters_NANO_RX targets #70
- ExpressLRS Configurator v1.0.6
[color=var(--color-text-secondary)] github-actions released this 2 days ago · 2 commits to master since this release[/color]
Changelog - ExpressLRS Configurator v1.0.5
[color=var(--color-text-secondary)] github-actions released this 5 days ago · 5 commits to master since this release[/color]
Changelog- After ExpressLRS/Docs migrated to mike for docs versioning configurator links to Expresslrs.org are returning 404 #56 (community contribution from @justinlampley)
- Select first flashing method if none is selected #57 (community contribution from @justinlampley)
- Fix Hz and GHz (community contribution from @avsaase)
- Copy the firmware file to the tmpPath with the original filename. #64 (community contribution from @justinlampley)
- Fix issue where flashing via WIFI does not work after a serial device has been selected. #63 (community contribution from @justinlampley)
- Update Node.js to v14.17.6 in build environment
- DAUTO_WIFI_ON_INTERVAL is now mandatory for WiFI capable *_TX targets on master / 1.1 #55
- Add HappyModel_ES24TX_Slim_Pro_2400_TX target
- After ExpressLRS/Docs migrated to mike for docs versioning configurator links to Expresslrs.org are returning 404 #56 (community contribution from @justinlampley)
- ExpressLRS Configurator v1.0.4
[color=var(--color-text-secondary)] github-actions released this 10 hours ago[/color]
Changelog- Open firmware.bin in a temp directory #42 (community contribution from @basters)
- Update user define descriptions FEATURE_OPENTX_SYNC and USE_500HZ #41 (community contribution from @basters)
- Have OmniBox maintain the original item order if there is no search value present (community contribution from @justinlampley)
- Display via_UART, via_WIFI, via_BetaflightPassthrough, via_stock_BL as radio selection #38 (community contribution from @justinlampley)
- Fix issue with expresslrs-configurator.log not being selected when opening logs folder (community contribution from @justinlampley)
- Display newer firmware version alert (community contribution from @justinlampley)
- Testing & flashing pull requests from the configurator app #43 (community contribution from @justinlampley)
- Bugfix: After clicking "Back" button from the firmware flashing screen firmware options are not present anymore (community contribution from @justinlampley)
- Open firmware.bin in a temp directory #42 (community contribution from @basters)
- Release ExpressLRS Configurator v1.0.3 · ExpressLRS/ExpressLRS-Configurator · GitHub
- Add beeper support in Ghost TX
- Produce more meaningful name to firmware targets (thanks to @justinlampley!)
- Device target selection by category, device (Thanks for @justinlampley!)
- Remove UNLOCK_HIGHER_POWER for DIY_2400_TX_ESP32_SX1280_E28_*
- Add beeper support in Ghost TX
- Release ExpressLRS Configurator v1.0.2 · ExpressLRS/ExpressLRS-Configurator · GitHub
Changelog- Remove USE_DIVERSITY from HappyModel EP receivers
- Remove UNLOCK_HIGHER_POWER for TARGET_NAMIMNORC_TX since it is enabled by default now
- Add BETAFPV Wifi targets
- Add -DUNLOCK_HIGHER_POWER to supported targets
- Add HappyModel_TX_ES915TX_via_WIFI target
- Add USE_DYNAMIC_POWER for _TX related targets
- Add HGLRC targets
- Point user define docs to expresslrs.org
- Add support for HOME_WIFI_SSID and HOME_WIFI_PASSWORD user defines
- Remove USE_DIVERSITY from HappyModel EP receivers
- There is also a new firmware release in the new configurator 1.1.0
Scott