02-Aug-2021, 03:15 PM (This post was last modified: 25-Nov-2022, 04:59 PM by SnowLeopardFPV. Edit Reason: Added "EDIT" line. )
EDIT (25th November 2022): The firmware detailed in this post never actually got released. Do not confuse it with the v01.00.06.07 firmware of the same version number that was released on 22nd November 2022 and which is mentioned in another post HERE. There is no fix in that firmware for the AV-IN issue or the "SD Card Slow" issue when recording to the full size Air Unit.
So after more than a year of radio silence, something seems to have kicked DJI into life with firmware updates for the standalone DJI FPV system.
Following the new v1.00.06.06 firmware release last week (see HERE) to support hardware changes to the Caddx Vista (apparently alternative chips used due to the global chip shortages), DJI are reportedly about to release another firmware "soon" that fixes some issues with analogue input and recording issues. It's not clear yet exactly what is supposedly fixed, but we can only hope it's the issue where when using an analogue module on the DJI FPV Goggles that the goggles just reboot to a black screen where the signal gets low (mostly prominent when using PAL analogue cameras), and also the "Slow SD Card" issues whereby a warning message of the same is put on the screen and the onboard Air Unit recording just stops, or gets corrupted.
If DJI keep this up and fix all of the existing known issues, plus implement Canvas Mode, all without breaking anything else in the process then they might well end up redeeming themselves. Let's just hope they continue to keep this up.
EDIT: The release notes below seem to confirm the above.
So after more than a year of radio silence, something seems to have kicked DJI into life with firmware updates for the standalone DJI FPV system.
Following the new v1.00.06.06 firmware release last week (see HERE) to support hardware changes to the Caddx Vista (apparently alternative chips used due to the global chip shortages), DJI are reportedly about to release another firmware "soon" that fixes some issues with analogue input and recording issues. It's not clear yet exactly what is supposedly fixed, but we can only hope it's the issue where when using an analogue module on the DJI FPV Goggles that the goggles just reboot to a black screen where the signal gets low (mostly prominent when using PAL analogue cameras), and also the "Slow SD Card" issues whereby a warning message of the same is put on the screen and the onboard Air Unit recording just stops, or gets corrupted.
If DJI keep this up and fix all of the existing known issues, plus implement Canvas Mode, all without breaking anything else in the process then they might well end up redeeming themselves. Let's just hope they continue to keep this up.
EDIT: The release notes below seem to confirm the above.