Problems with Crossfire showing up in Beta Flight

-Skystars mini f7 HD pro 55amp esc stack 

- Crossfire Nano Module on Radio Master Zorro
- Crossfire Nano Receiver 


- Using UART 1 Channel 
- Wiring Done Correctly to my knowledge after multiple checks 
- Solid green on receiver showing its bound 
- Zorro showing telemetry

Things i am going to try 
- Switching TX RX wires
- Switching UART Channel to a another vacant channel (Maybe i fried when soldering) 

I dont know what else to do
Firmware's are all updated on module , receiver, and flight controller

attaching dump and pictures

Attached Files

Thumbnail(s)
           

  # dump all file - crossfire issues 5-4-24.txt (Size: 37.06 KB / Downloads: 10)

I was dissapointed to realize that my Flywoo GOKU F745 20x20 40A AIO would not fit my Hurricane 2.5 frame. My bad.  Only a 25.5x25.5 whoop style will work.
It was the usual price and availability search, I purchased a: JHEMCU GHF745 HD AIO F7 OSD Flight Controller and Built-In 40A BLHeli32 3-6S 4IN1 ESC. I have seen the JHEMCU brand used in a lot of quads here on the forum but I do not see any reviews of this board. Hopefully I didn't buy a flawed product, to me it looks like a reasonably priced AIO with no shortcomings. I'll make it work but any comments?

SPECIFICATIONS:

Brand name： JHEMCU
Model: GHF745AIO
MCU： STM32F745/216MHZ
IMU: MPU6000/Gyro/Accel
OSD： AT7456E
Baro： YES
Blackbox： 8MB
Input voltage: 3S-6S（11.5V-26V）
5V-BEC： 5V/2.5A ±0.1V
10V-BEC: 10V/2A ±0.1V
Receiver： ELRS(CRSF), TBS(CRSF) ,SBUS,IBUS,DSM2,DSMX
HD接口： YES
USART: UART1,UART2,UART3,UART4,UART5,UART6
IIC： IIC1
Led_Strip: YES
Buzzer: 5V
ESC signal: Dshot150，Dshot300，Dshot600
USB: Micro USB
Current port： YES
Voltage sensor：YES
DFU button： YES
FC Firmware: betaflight_4.4.2 JHEF745.HEX
Size: 33*33MM
Mounting Hole:25.5*25.5*3MM
Weight: 7.3g

ESC SPECIFICATIONS:

ESC Current: 40A/50A
ESC MCU： STM32G071
ESC TYPE: Blheli_32
ESC Firmware: JHEMCU_G071_ESC_Multi_32_9.HEX

hey

i have vtx walksnail ,

After plug lipo , he always = sold green
without an image

before he work , but now sold green ,

I have been using a Sim (Drone Racing League) for about a week now and spend about an hour or two on it at night. Pretty fun actually. My oldest went off to college and we use to game together especially when he was younger. So I am a natural thumber with the Boxer gimbals just like I would with a PlayStation or Xbox joystick. The gimbals are a bit unforgiving as they have sticky prongs on the end so I noticed my thumbs are getting marks on them, LOL. Maybe I just need to man up.

But I saw an article about people pinching the gimbals which just doesn’t seem natural. Then I came across another person that uses a hybrid method with thumbs on the gimbal controlled mainly by the thumb and the index finger on the sides for additional control.

I am still on beginner level and been using only Acro mode which is all I plan to use on the 3” toothpick I built. I was frankly horrible at first but now can follow a line and pop balloons and enter through gates with ease on a course that changes altitudes. I am still pretty bad on slalom courses especially where the gates are angled and you have to throttle pitch and roll real fast. I tend to overshoot the target but getting better with practice.

Back to my main question is what do others prefer when flying. Trying to build muscle memory so now is the best time to make a change.

Thanks as always. The site has been a huge help.

Please Help!


New to fpv hobby....

Downloaded betaflight configurator 10.9.0 a year ago, been working with no problems. I own 4 bnf's with no firmware newer than 4.4.2 on any of the drones.
Yesterday out of the blue when I plug in any of my drones into BF, a pop up notice appears stateing - You are using an outdated version of BF configurator. Using a newer
version of the firmware, with an outdated version of configurator means that changing some settings will result in corrupted firmware configuration and a non working craft.
furthermore some features of the firmware will only be configurable in CLI. Betaflight configurator 10.10 is available for download online. 
I was under the belief that you only need to update to BF 10.10 if you were running a drone with 4.5 firmware? I can still x out the pop up and config
seems to be working fine other than that. Any idea's of what to do?

hi guys,

I have built a 7 inch drone for the first time. Everything works except for the motors/throttle stick. When I run the motors through Betaflight, they run smoothly and quietly. However, when I arm the drone via the remote control, they run unevenly and stutter. And if I then accelerate just a little, the motors (without propellers) turn to full throttle and at the same time the throttle stick fails completely. I can then only stop the motors with a failsafe (switch off the RC) or, of course, pull the battery. But if this happens with propellers... Can anyone tell me how I can fix this?

Best regards

Michael

Translated with DeepL.com (free version)

Hi all,
I'd be very grateful for any help getting my transmitter and receiver to work with FETTEC KISS V2 fc.

I'm trying to use these:
the tx - https://allegro.pl/oferta/aparatura-pilo...5491258261
the rx - https://allegro.pl/oferta/odbiornik-6ch-...5491258259
the fc - https://www.fettec.net/media/pdf/33/20/2...manual.pdf



TX and RX are PPM only, FC is claimed to support PPM in the manual and KISS Configurator has a lot of PPM options for PPM support.
Does this FC support PPM at all ? If so, how I should wire up the receiver and the fc ?
Has anyone done this before ?

If not PPM, what are the alternatives for tx and rx compatible with this fc ?

Many thanks for any help on this issue.

I need some help.

I took my Meteor65 Pro and converted it to 31mm props, 0702 (21500 kV) motor, air frame. 

I finally got those little motors spinning properly and it did hover.

However during the beginning of the pack when the voltage is high the quad tended to fall out of the sky after a few seconds. When the battery drops a bit lower like after a minute or so the quad stabilizes and hover well. 

I am doing most of the tests LOS because it is pretty annoying not able to see from the goggle. The quad just roll left and drop.

I am suspecting I have a tuning issue. Maybe a filter is configured wrong or something. However I am not great with configurating BetaFlight.

Can some one help or do I have to do more search and see what I can find online. Most videos I found is about the 65 Pro. When it was a Pro with larger prop it did fly very well. 

The motors are from Tiny Whoop Onesies 0702 21500 kV. So I imagine the frequency is a bit different.

Here is before:



Here is after conversion:



Thanks in advance for any help.

Hey

I see a lot of people diving on the surface of the sea. Does this affect the Motor ,FC ,ESC , etc?

Hey

Why do higher voltage batteries need lower KV motors?