Problems with Crossfire showing up in Beta Flight

-Skystars mini f7 HD pro 55amp esc stack 

- Crossfire Nano Module on Radio Master Zorro
- Crossfire Nano Receiver 


- Using UART 1 Channel 
- Wiring Done Correctly to my knowledge after multiple checks 
- Solid green on receiver showing its bound 
- Zorro showing telemetry

Things i am going to try 
- Switching TX RX wires
- Switching UART Channel to a another vacant channel (Maybe i fried when soldering) 

I dont know what else to do
Firmware's are all updated on module , receiver, and flight controller

attaching dump and pictures

A couple of things to check:

1. Check the CHANNEL MONITOR page on your transmitter to check that the bars are moving when you move the sticks.
   
2. Run the Crossfire or Agent Lite LUA script on your transmitter and under the Channel Map section check that CH1 is set to CRSF TX and CH2 is set to CRSF RX.
   

Also, run the "status" command in the CLI and post the results back here.

(05-May-2024, 10:46 AM)SnowLeopardFPV Wrote: A couple of things to check:

1. Check the CHANNEL MONITOR page on your transmitter to check that the bars are moving when you move the sticks.
   
2. Run the Crossfire or Agent Lite LUA script on your transmitter and under the Channel Map section check that CH1 is set to CRSF TX and CH2 is set to CRSF RX.
   

Also, run the "status" command in the CLI and post the results back here.

Verified 1 and 2 checks 

I have movement on channel monitor 
Channel map is correct 

ive attached status down  below

I don't see anything obviously wrong with your wiring or settings, so it should work unless there is a hardware fault with the Crossfire Nano RX or a bug in Betaflight 4.5.0.

Use a magnifying glass to check both sides of the board for any components that appear to be missing in case any got knocked off the board.

Try flashing the FC to some previous versions of Betaflight (4.4.3, 4.3.2 and 4.2.11) to see if it works under any of those which will then confirm or eliminate the root cause as being a bug in Betaflight 4.5.0 for that particular FC.