Posts: 11
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 3
Joined: Sep 2016
Reputation:
0 I tried, BF 2.9.1 - BF 3.0 and tried standart Naze firmware too.
• Posts: 947
Threads: 66
Likes Received: 350 in 248 posts
Likes Given: 164
Joined: Apr 2016
Reputation:
34 13-Sep-2016, 11:17 AM (This post was last modified: 13-Sep-2016, 11:19 AM by oyvinla.) Ok, are you sure that it gets flashed properly? You choose the correct FC in the drag down menu in Betaflight GUI?
I have problems using my windows computer when flashing in bootloader mode (I guess it is some driver problems, but since I also got a mac, I normally use that one when I get problems when flashing). I'm sorry if it is not very helpful for you, but I guess there are someone here with the same driver problem that can step in if it is a driver issue
• Posts: 947
Threads: 66
Likes Received: 350 in 248 posts
Likes Given: 164
Joined: Apr 2016
Reputation:
34 If you scroll down a bit on the "Choose a board" window, you should see the spracing target. Is that the FW you have tried to flash? from your last picture it looks like you choose the doge fc
• Posts: 11
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 3
Joined: Sep 2016
Reputation:
0 Yes I have written upside, Thanks again...
• Posts: 2,416
Threads: 51
Likes Received: 1,861 in 1,175 posts
Likes Given: 3,315
Joined: Mar 2016
Reputation:
74 Not sure, but I think he solved the problem - that's how I read his edit (and his note afterwards) anyway....
• Posts: 39
Threads: 8
Likes Received: 5 in 4 posts
Likes Given: 4
Joined: Oct 2016
Reputation:
0 I am having the same problem with my foxeer f3 board. I can't get it to connect or flash it using betaflight or cleanflight. Any help would be great.
•