A new Firmware update. This is a Release Candidate and not proven stable only use if it has features you need now.

ExpressLRS V2.0.0 Release Candidate 2

• Prevent going to 1:2 ratio when disconnected and entering Lua (#1092)
  
  
• Do not process start wifi on stm32 (#1099)
  
  
• Use two param popupConfirmation on FreedomTX (#1096)
  
  
• No reason to clear IRQ flags manually (#1086)
  
  
• Fix LUA render on NV14 (#1091)
  
  
• Shorten Namimno OLEDs to 15 chars (#1093)
  
  
• Prevent crash when using BACK item when lua is reloading (#1080)
  

First post also updated

Scott

A new update for the configurator. new targets and enhancements to the configurator.   First post updated

ExpressLRS Configurator v1.2.4


Changelog

• Point to correct LUA script version based on selected firmware source (#121)
  
• Store regulatory domain and WIFI settings at the global scope (#129)
  
• Join HappyModel ES900 and HappyModel 915 Mhz categories (#127)
  
• Add MATEK_2400_RX_PWM target support (#123)
  
• Display target load error messages (#124)
  
• Add support for DIY_900_RX_ESP8285_SX127x_via_WIFI target
  
• Update ExpressLRS wiki link to ExpressLRS.org (#119)
  
• Add DIY PWMP targets
  
  

A new update for the configurator. More new targets and enhancements to the configurator.  First post updated as well

ExpressLRS Configurator v1.2.5



Changelog

• Add support for DIY_BLE_JOYSTICK once merged upstream #122
  
• Add USE_TX_BACKPACK support to R9M TX target #132
  
• Add DISABLE_ALL_BEEPS support #131
  
• iFlight 2.4 GHz Tx and Rx targets #133
  
  

New update for the configurator , First post updated

ExpressLRS Configurator 1.3.2


Changelog
Fix long device names in lua
Merge network device options with default options

New update for the configurator    added to first post

ExpressLRS Configurator 1.3.3


Changelog

• Merge network device options with default options #155
  
  
• Do not store sensitive data (binding phrase, wifi credentials) inside application logs #168
  
  
• Do not display sensitive data in the UI by default #171, #187
  
  
• New device definition structure #172
  
  
• Warn users about USE_DIVERSITY misuse #174
  
  
• Gracefully handle corrupted git repository state #175
  
  
• Add support for REGULATORY_DOMAIN_EU_CE_2400 #177
  
  
• Wiki url versioning #178
  
  
• Enable DIY ESP32 based hardware WiFi flashing #188
  
  
• Add betaFPV 2.4 micro 1000mw target #189
  
  
• Bugfix: build options not visible when reselecting target #193
  
  
• Add TBS Fusion backpack support #198
  
  
• Disable wifi device alerts during build #204
  
  
• Add FAN_MIN_RUNTIME #207
  

Scott

Updated first post

A new update for the configurator. A bunch of new hardware support and some bugfixes

ExpressLRS Configurator 1.3.4

Changelog

• Add RadioMaster Zorro internal 2.4 GHz module support #226
  
  
• Add RadioMaster Zorro TX Backpack support #235
  
  
• Add support for EdgeTxPassthrough flashing method, DUPLETX DIY hardware #217
  
  
• Hide HOME_WIFI_SSID, HOME_WIFI_PASSWORD, MY_BINDING_PHRASE and MY_UID from UI logs
  
  
• Fixed documentation links #210. (Thanks @dimitroffs!)
  
  
• Add Vantac 2.4 GHz TX & RX targets #221
  
  
• Add Jumper 2.4 GHz AION Nano TX Module #220
  
  
• Add Jumper T-Pro internal 2.4 GHz module support #238
  
  
• Remove REGULATORY_DOMAIN_EU_CE_2400 from devices that do not support 10mw #237
  
  
• Add Rx5808 esp01f backpack targets #236
  
  
• Fix network device select issue #228
  
  
• Sort category and device drop-downs alphabetically #225
  
  
• Default AUTO_WIFI_ON_INTERVAL to 60
  
  
• Rename "BETAFPV 2400 TX" to "BETAFPV 2400 TX Nano"
  

Scott

A new configurator update, targets and bugfix.  First post updated

ExpressLRS Configurator 1.3.6

Changelog

• Upgrade platformio installer to 1.1.0 #254
  
  
• Add support for Jumper_AION_2400_T-Pro_TX_via_ETX target #256
  
  
• Fix windows issue where incorrect python version was picked by platformio
  
  
• Fix issue when configurator was not able to clear platformio files when platformio installation is broken
  

Scott

A new configurator update, targets and bugfix - First post updated



ExpressLRS Configurator 1.3.8


Changelog

Actually, these changes were from 1.3.7  not much in 1.3.8

• Add RadiomasterRC 2.4 GHz RX targets #265
  
  
• Fixed Windows backpack build issues #261
  
  
• Improve navigation across firmware data tabs #266
  
  
• Add Skystars SS24D diversity receiver #259
  
  
• Add BetaFPV backpack device #213
  
  
• Git based loading of target and user defines fixes #262
  
  
• Remove UNLOCK_HIGHER_POWER from BetaFPV TX 1W module #273
  
  
• Display warning for users if they are trying to flash outdated custom BetaFPV #274
  

Recommend everyone do the update. I had some hiccups moving stuff to version 2 without doing the update. Also helps if you're playing around with the spi receiver type with the latest happymodel and betafpv aio boards.

I have a question regarding:  Remove UNLOCK_HIGHER_POWER from BetaFPV TX 1W module #273

If I read this correctly, the command is to UNLOCK the Higher Power band of the "Receiver" ???
If so why remove it???  Is that now unlocked by default???  OR  DO they NOT want to ever unlock it???

Thanks

(28-Feb-2022, 02:12 PM)iFly4rotors Wrote: I have a question regarding:  Remove UNLOCK_HIGHER_POWER from BetaFPV TX 1W module #273

If I read this correctly, the command is to UNLOCK the Higher Power band of the "Receiver" ???
If so why remove it???  Is that now unlocked by default???  OR  DO they NOT want to ever unlock it???

Thanks

Yes, it's no longer needed as it does 1W by default. 

I believe this setting was initially for units without active cooling to enable output over 250mW if you added additional cooling, but is not needed for modules that come with a fan.

A new configurator update, enhancments. Added to first post

ExpressLRS Configurator 1.3.9

Changelog

• Enable Electron Auto Updater on Windows #287
  
  
• Add Force Upload Support #281
  
  
• Add alias for Namimno OLED backpack #284
  
  
• Adds the HM EP82 backpack target #283
  
  

Scott

A new configurator update, enhancments.  First post updated 
I like the new Update method, It asks if you want to download, and does. 


ExpressLRS Configurator 1.3.10 
[color=var(--color-success-fg)]Latest

[/color]
Changelog

• Change RX24T to be an alias of BetaFPV 2400 RX #304
  
• Add BetaFPV pwm and seperate Lite from Nano #307
  
• Rename BetaFPV nano targets (from BETAFPV_2400_RX to BETAFPV_Nano_2400_RX) #308
  
• Display error message when network device target can't be selected #313
  
• Add save build log #293
  
• Add generic build error message #292
  
• Add copy logs button #291
  
• Warn about unplugging power to soon when flashing via WI-FI #290
  
• Update description about EU CE 2.4 GHz mode #294
  
• Upgrade serialport to 10.4.0 #296
  
• Disable Linebreak Style Rule #299
  
• Upgrade test workflow to use node 14.17.6 #298
  
• Disable warn for console.error() #302 (community contribution from @parkerbjur)
  
• Network Device Monitor Update #305
  
  

A new configurator update, enhancements.   First post updated.

ExpressLRS Configurator 1.3.11

[color=var(--color-fg-muted)]released this 5 days ago[/color]

Changelog

• Add NamimnoRC Diversity RX target support #319
  
• Add TX16S internal module and Backpack support #317
  
  

Scott

A new configurator update, enhancments.  First post updated

ExpressLRS Configurator 1.4.1 



Changelog

• Add BETAFPV LiteRadio 3 Pro target #334
  
• Upgrade Node.js from v14 to v16 #333
  
  

Scott