Posts: 634
Threads: 56
Likes Received: 335 in 196 posts
Likes Given: 183
Joined: Mar 2016
Reputation:
15 As long as you put the right firmware it doesnt matter which tool will put it there, im currently using andreym chrome configurator and for me it is great. Good part after you have switched the cables on motors that all of your esc will be in full sync ( every parameter)
Next step try to hover your quad
All the best
Grzesiek (Grisha/ Greg)
Curently flyable: Nox 5, Minimalist 112
Bench / in progres: fixing Nox 3, Scrap
thinking about building: 450
• Posts: 236
Threads: 2
Likes Received: 66 in 45 posts
Likes Given: 27
Joined: Jan 2016
Reputation:
17 BLHeli Conf shows red asterisks on the settings that are not in sync. I don't really understand what you're guys talking about, if you've experienced some issue, why I didn't see any word nor report from you?
• Posts: 634
Threads: 56
Likes Received: 335 in 196 posts
Likes Given: 183
Joined: Mar 2016
Reputation:
15 Yup i think the problem was with flashing the firmware to esc and now it has been resolved
All the best
Grzesiek (Grisha/ Greg)
Curently flyable: Nox 5, Minimalist 112
Bench / in progres: fixing Nox 3, Scrap
thinking about building: 450
• Posts: 42
Threads: 10
Likes Received: 3 in 2 posts
Likes Given: 19
Joined: Aug 2016
Reputation:
1 No issue with blheli configurator. My problem was flashing the right firmware but with blheli configurator it allowed me to do it. Grisha0 was making sure I check to make sure everything is in sync. And it is.
• Posts: 236
Threads: 2
Likes Received: 66 in 45 posts
Likes Given: 27
Joined: Jan 2016
Reputation:
17 Ok, I misunderstood then. Update to 0.1.6 and don't forget to use "Save Log" should you run into problems.
I'll add an automatic bug report feature a bit later.
• Posts: 42
Threads: 10
Likes Received: 3 in 2 posts
Likes Given: 19
Joined: Aug 2016
Reputation:
1 • Posts: 236
Threads: 2
Likes Received: 66 in 45 posts
Likes Given: 27
Joined: Jan 2016
Reputation:
17 02-Dec-2016, 08:42 PM (This post was last modified: 02-Dec-2016, 08:51 PM by AndreyM.) That's the very reason why there is throttle calibration in first place, PPM min/max values shouldn't necessarily be exactly the same. You can ask BLHeliSuite not to complain about PPM min/max.
BLHeli Conf also has 16.5, why you did not flash it there?
P.S. Update BLHeli Configurator to 0.1.6, do you see the "Save Log" button in the bottom left corner? 0.1.6 highly increases usefulness of "Save Log" for me as a developer if you run into problems. Don't forget to "Save Log" whenever you have issues.
• Posts: 42
Threads: 10
Likes Received: 3 in 2 posts
Likes Given: 19
Joined: Aug 2016
Reputation:
1 02-Dec-2016, 09:14 PM (This post was last modified: 02-Dec-2016, 09:48 PM by rcandvideogameguy.) Ok thanks so i sounds like everything is ok then. i didnt realize that blehil configurator had the 16.5 update i just seen it when i went into blheli suite because it prompted me for it. Sorry about all the questions but i appreciate the answers. Im still new to the hobby and im trying to learn so i wasnt sure. I definitely be using the blheli configurator from now on. I like how it is setup and the menus. It is much more easier to use and ill save log any time I encounter an issue