Posts: 8
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2016
Reputation:
1 19-Mar-2016, 02:11 AM (This post was last modified: 19-Mar-2016, 02:24 AM by Dal75.) your D on roll and pitch definitely needs to come down. It is swamping the Pterm. drop it by about 2 on both axis and try again. Yaw looks ok and your gyro traces are pretty clean so not much noise getting to them. You could probably raise P on pitch by one or two points. But certainly drop the d term on roll and pitch down some. A copy and paste of your dump could b helpful.
I fly luxfloat too (but on betaflight) and generally yaw P is too high on stock. Most have to go to between 2 and 3. Are you on cleanflight? Maybe its not the same on cleanflight, im not sure on that.
• Posts: 5,322
Threads: 673
Likes Received: 3,159 in 1,747 posts
Likes Given: 2,032
Joined: Jan 2016
Reputation:
139 Yea Dal75 is right you D term is very noise on both pitch and roll.
it would help if you could post your CLI command as well (use code button in editor)
I reckon you don't have your Dterm_cut_hz enable... set it to 60 see if it's better, if not set it to 40 should do it.
•