Posts: 2
Threads: 1
Likes Received: 2 in 1 posts
Likes Given: 0
Joined: Sep 2023
Reputation:
0 First build. Everything shows correct in Betaflight, arm switch, mode switch and all stick functions. Gyros calibrated and they move in the correct direction. When disconnected from computer and bound to radio for flight. I arm the motors and they spin up to the 5.5%, but when I give throttle, the motors follow stick movement and then slowly start to accelerate to max RPM. I have picked the frame up and moved it, the motors follow by trying to correct, but they keep increasing RPM. The only way to stop them is to disarm. I have reflashed to no avail.
Thanks,
Jed
• Posts: 334
Threads: 17
Likes Received: 273 in 173 posts
Likes Given: 291
Joined: Jul 2022
Reputation:
14 That happens when you dont actualy fly. Its normal. Go fly it and see how it behaves in a normal hover.
Posts: 4,073
Threads: 75
Likes Received: 2,549 in 1,858 posts
Likes Given: 3,949
Joined: May 2021
Reputation:
121 10-Sep-2023, 09:37 PM (This post was last modified: 10-Sep-2023, 09:38 PM by Lemonyleprosy.) Put some props on it.
It’s normal behavior with props off or when the quad is held down.
Dangerous operations.
Disclaimer: I don’t know wtf I’m talking about.
I wish I could get the smell of burnt electronics out of my nose.
• Posts: 2
Threads: 1
Likes Received: 2 in 1 posts
Likes Given: 0
Joined: Sep 2023
Reputation:
0 Thanks!!! Threw the props on and it flew like a champ..
Cheers,
Posts: 4,073
Threads: 75
Likes Received: 2,549 in 1,858 posts
Likes Given: 3,949
Joined: May 2021
Reputation:
121 Cool beans. Happy flying!
Dangerous operations.
Disclaimer: I don’t know wtf I’m talking about.
I wish I could get the smell of burnt electronics out of my nose.
•