26-Jul-2023, 07:42 PM
Think I've made a mistake buying FRSKY but it is what it is.
I've been through numerous other posts trying a host of different solutions. I've not been able to to get any of them to work so thought I'd post my own setup.
It's bound and connected with with Green and Blue lights on the RXSR and the TX16S Shows good signal strength but none on the controls are registering.
R-XSR firmware : RXSR_ACCST_2.1.0_Fport_FCC.frk
TX16s firmaware : 2.3.15-otx(1004ef7c)
TX16s Internal RF settings
Mode Multi FrSkyX2 D16
Module status V1.3.3.20 AETR
Channel Range CH1- CH16
set serialrx_inverted = ON
set serialrx_halfduplex = ON
(Images and dump file attached)
Any help would be great. I've been going round in circle trying all different combinations to get this working and still struggling.
I've been through numerous other posts trying a host of different solutions. I've not been able to to get any of them to work so thought I'd post my own setup.
It's bound and connected with with Green and Blue lights on the RXSR and the TX16S Shows good signal strength but none on the controls are registering.
R-XSR firmware : RXSR_ACCST_2.1.0_Fport_FCC.frk
TX16s firmaware : 2.3.15-otx(1004ef7c)
TX16s Internal RF settings
Mode Multi FrSkyX2 D16
Module status V1.3.3.20 AETR
Channel Range CH1- CH16
set serialrx_inverted = ON
set serialrx_halfduplex = ON
(Images and dump file attached)
Any help would be great. I've been going round in circle trying all different combinations to get this working and still struggling.