Hey y'all, I'm having trouble getting my r xsr receiver to enter bind mode. When I hold down the bind button and power it on, all three LEDs (red, green, blue) are solid when, from what I've found, the red LED should be blinking to indicate bind mode. I've tried flashing all the different ACCST firmwares (2.1, 2.0, 1.9, and even ACCESS) and it still will not enter bind mode. I've seen many people have this problem and have been able to fix it by flashing older firmwares but even this doesn't seem to work for me. Any ideas?

ISSUE SOLVED!

I struggled with this problem for the entirety of yesterday, flashing and reflashing all the different firmwares and nothing seemed to work!

It turns out I was interpreting the LED sequence wrong!

I though that A solid blue, green, and red LED meant that it was not in bind mode and that a flashing red LED meant that it was in bind mode. 

I was wrong, the solid red meant that it WAS in fact in bind mode and the flashing red meant a successful bind. I flashed ACCST 2.1 and was able to get my taranis qx7 to bind!