15-Jun-2021, 12:29 PM
Hello , i am new and currently working on my end course projet which is my first FPV.
Okay here is my setup: I am working with a MatekF405-STD flight controller and the my ESC are "[b]cyclone 45A 2-6s BLHeli[/b]", a " RADIOLINK R8EF" receiver and a "Radiolink T8FB" transmitter, i also have the "AIR gear 2213/kv920" motors with somme 9.5" propellers.
The fpv is about 1.9kg and 17.7"/12.5"
When it's armed the motor are spinning correctly and and i can adjust the motors speed at will.But it is not taking off at all and makes a lot of noise (like really a lot).I first thought it was a betaflight configuration (I am using a Dshot600 protocol by the way) issue so i desabled AIRMODE and try a different PID configuration but i had the same result.
I am really confused because i can not figure out what's the issue here.
Can you guys please help me out?
(sorry for my poor english by the way, i'm not used to it).
Okay here is my setup: I am working with a MatekF405-STD flight controller and the my ESC are "[b]cyclone 45A 2-6s BLHeli[/b]", a " RADIOLINK R8EF" receiver and a "Radiolink T8FB" transmitter, i also have the "AIR gear 2213/kv920" motors with somme 9.5" propellers.
The fpv is about 1.9kg and 17.7"/12.5"
When it's armed the motor are spinning correctly and and i can adjust the motors speed at will.But it is not taking off at all and makes a lot of noise (like really a lot).I first thought it was a betaflight configuration (I am using a Dshot600 protocol by the way) issue so i desabled AIRMODE and try a different PID configuration but i had the same result.
I am really confused because i can not figure out what's the issue here.
Can you guys please help me out?
(sorry for my poor english by the way, i'm not used to it).