30-Apr-2017, 09:13 PM (This post was last modified: 30-Apr-2017, 11:41 PM by aziassassin.)
I have finished EVERY part of my build except soldering the motors to the ESC's. I have tested everything in cleanflight to make sure I get the expected results and it all looks good (motors excluded obviously). The reason I have not soldered them yet is two fold.
I want to use bullet connectors for the motors for quick swap capability in case I blow/damage an ESC or motor someday.
The motors also came with relatively short wires which do not reach properly with my frame.
What wire should I be buying for this and where should I buy it from? I went to Lowes & Menards and neither seemed to have what I needed.
I am using 25A BLHELI.S ESC's and Racerstar BR2205 KV2300 Motors.
THANK YOU!!!
I want to use bullet connectors for the motors for quick swap capability in case I blow/damage an ESC or motor someday.
The motors also came with relatively short wires which do not reach properly with my frame.
What wire should I be buying for this and where should I buy it from? I went to Lowes & Menards and neither seemed to have what I needed.
I am using 25A BLHELI.S ESC's and Racerstar BR2205 KV2300 Motors.
THANK YOU!!!