19-Feb-2016, 01:22 AM (This post was last modified: 19-Feb-2016, 01:23 AM by trojanGoat.)
Hey Guys,
Just a quick question. For my next build I'm planning to use the emax racing motors. Here's some data:
https://youtu.be/AV245gBaR5Q?t=233
The part I'm confused about is the amount of current the esc can handle. I know I saw on a thread I think in this forum that had tests pushing higher amps than the esc is rated for. If it's drawing close to 30a at 100% throttle, should I get 30a esc? I won't be running 100% all the time, just in bursts. I'm assuming for the most part it'll be between 60-80%.
Cheers.
~j
Just a quick question. For my next build I'm planning to use the emax racing motors. Here's some data:
https://youtu.be/AV245gBaR5Q?t=233
The part I'm confused about is the amount of current the esc can handle. I know I saw on a thread I think in this forum that had tests pushing higher amps than the esc is rated for. If it's drawing close to 30a at 100% throttle, should I get 30a esc? I won't be running 100% all the time, just in bursts. I'm assuming for the most part it'll be between 60-80%.
Cheers.
~j