Hi, does anyone know if DJI Goggles 2 will broadcast to a Goggles V2?

The answer unfortunately is no. There are no wireless streaming capabilities on the DJI FPV Goggles V2. The Googles 2 do have DLNA streaming capabilities but it is just for streaming something into the goggles and not out of the goggles. You can't even connect anything into the DJI FPV Goggles V2 using the USB-C port because that is only capable of outputting a video stream and will not accept an input video stream.

The DJI O3 Air Unit does support audience mode but it's not clear if that only work with multiple pairs of Goggles 2 or if it also works with DJI FPV Goggles V2. There is only one way to find out and that is to try it using the instructions below. Just keep in mind that the audience goggles won't get any re-transmission data packets like the main pilot goggles do so the experience for the people wearing audience / spectator goggles will be much worse than what the pilot experiences (i.e. a stuttering / blocky video feed).

DJI Wrote:DJI O3 Air Unit supports Audience mode when used with DJI Goggles 2, which allows the live view to display on multiple goggles simultaneously. Go through the steps below to link the air unit with goggles.

1. Link the aircraft with the (main) pilot goggles.
   
2. Select "Settings" on the pilot goggles.
   
3. Tap “Transmission”, select “Pilot", and enable "Broadcasting".
   
4. The device number appears, such as 312E, which can be found on audience goggles. After selecting the device number on audience goggles, the live view will be synchronized and displayed on audience goggles.
   
5. Power on audience goggles, go to "Settings" > "Transmission" > "Audience", select "312E" (as shown in the picture), and the live view on the pilot goggles will be displayed on the audience goggles.
   

I can atest to this. Audience mode between Goggles 2 and Integra goggles is excellent ONLY ONLY if you fly 50 to max 80ft from your position after that it is so pixalated or blocky. It's really terrible which is really to bad they are so terrible. I type this on the date of June 8,2023. I hope they can come up with much better video in the audience goggles as I would love to sharing ride alongs with my father in law which has fallen sick. If anyone reads this and can tell me how i can share really nice video in 2 goggles please let me know.
[email protected]

Ok it seems like i have to think out of the box. I am trying to use both my V2 goggles and my goggles 2 to give ride alongs to friends and family. So here is my plan but not sure about RF / VTX interference.

My plan is to use my Air O3  with my goggles 2  on my present 5" quad and on the SAME quad mount on top of upper plate my Vista and therefore i can use my Goggles V2.  Camera will both face forward with the vista camera on the top deck. My 3d printer can accommodate all mounting to be done.

My question how do i wire in the vista to my nazgul2 5" ?

Will the 2 vtx interfere ?
Any thoughts

Thank you

I use my older FPV Goggles V2 for my wife to ride along. I use my Integras. I have had zero issues with my O3 units. I have not tried them on my Vista units, but I won't be doing that as I'm replacing them. Slowly getting to be Caddx/WS-free. And any other tech they may make. I had heard it was the same with Goggles 2 and FPV V2, but maybe I was mistaken?

But what are you using: Goggles V2 or Goggles 2, or FPV Goggles V2? There are too many to keep track of with similar names.