01-Sep-2022, 09:24 PM
(25-Aug-2022, 04:48 PM)Ponsiiron Wrote: Hello, i'm building a new cinewhoop a squirt v2.2 with this same motors, my build is 6s and i choice tmotor f7 hd and tmotor f55 A pro II as ESC.
I continue to have desync problem !!!! Also when i push the throttle idle up the 70 % the drone desync.
Today i try to change settings in bl_heli 32 and nothing happen. When I set the motor timing to 23 deg the drone desync and than the rear right motor start to smoke ;(((
Ouch. Did you lower the rampup power to 15% in blheli32? Also you can't ry putting a throttle limit at 80% in betaflight. In my testing figuring this out I did have one motor that smoked too but it didn't destroy it and still flew fine after. Just depends on how bad it was.
Try rampup at 15% if you haven't already.