09-Jun-2016, 04:43 AM
Hey All,
I've been having problems with desyncs and I haven't been able to figure it out. I even changed my FC!!! and pretty much tried every blheli demag / timing config, same problem.
Here's my setup:
Armattan F1FC with betaflight 2.8.1
LB 30a esc with multishot.
cobra 2206, 2100kv
dal 6/45/3
I finally ran a blackbox log with the new FC. Now I'm not too literate enough to get a good read out of the BB info, maybe someone here can help. There's a few things I noticed...
1) Seems like my gyro is noisy. I'm using Armattan F1FC with betaflight 2.8.1, 30a esc with multishot.
2) I notice when the problem happens, my voltage drops to the cutoff range. You can see this in my blackbox log.
Do you guys think my 6 inch props are just drawing too much juice and it's actually activating the voltage cutoff?
https://www.dropbox.com/s/s0s3bpf9y2a9j8...2.TXT?dl=0
Thanks
I've been having problems with desyncs and I haven't been able to figure it out. I even changed my FC!!! and pretty much tried every blheli demag / timing config, same problem.
Here's my setup:
Armattan F1FC with betaflight 2.8.1
LB 30a esc with multishot.
cobra 2206, 2100kv
dal 6/45/3
I finally ran a blackbox log with the new FC. Now I'm not too literate enough to get a good read out of the BB info, maybe someone here can help. There's a few things I noticed...
1) Seems like my gyro is noisy. I'm using Armattan F1FC with betaflight 2.8.1, 30a esc with multishot.
2) I notice when the problem happens, my voltage drops to the cutoff range. You can see this in my blackbox log.
Do you guys think my 6 inch props are just drawing too much juice and it's actually activating the voltage cutoff?
https://www.dropbox.com/s/s0s3bpf9y2a9j8...2.TXT?dl=0
Thanks