06-Oct-2020, 08:18 AM
So I managed to have a flight in the new crossfire system and so far it's great, but i've hit a road block.
After a probably avoidable crash, the nano RX won't communicate with the controller (TX) anymore.
The OSD shows LQ/RSSI flashing 49, there is no telemetry indication on the TX screen of my Q X7 and the boot sequence seems normal. Solid green on the nano RX but it doesnt show up in the tools menu as it used to.
I've tried putting the QX7 into bind mode and the crossfire module flashes green as expected, but nothing comes up from the RX.
The nano bound before the crash but when I bound it the first time, it happened automatically after I put the QX7 into bind mode, which I understand is by design?
How do I re-bind the presumably still functional nano which was previously bound to the same controller/radio?
After a probably avoidable crash, the nano RX won't communicate with the controller (TX) anymore.
The OSD shows LQ/RSSI flashing 49, there is no telemetry indication on the TX screen of my Q X7 and the boot sequence seems normal. Solid green on the nano RX but it doesnt show up in the tools menu as it used to.
I've tried putting the QX7 into bind mode and the crossfire module flashes green as expected, but nothing comes up from the RX.
The nano bound before the crash but when I bound it the first time, it happened automatically after I put the QX7 into bind mode, which I understand is by design?
How do I re-bind the presumably still functional nano which was previously bound to the same controller/radio?
My Setup: QX7 with CF mod / Flysight FG01 / 4S 1.5Ah / 5" and 7" (in progress)