Posts: 359
Threads: 14
Likes Received: 163 in 126 posts
Likes Given: 1
Joined: Jul 2020
Reputation:
12 Stripping the Vista heat sinks would probably make it fit and leave room for cooling.
I don't know how viable an idea that is for longevity of the Vista. 1200mw was obviously a design idea they didn't implement but nothing bad has come from this yet, that I've heard of anyway.
Enough people have been doing this lately I'm sure we'll start to see some failures soon enough if it's an issue.
Posts: 731
Threads: 20
Likes Received: 490 in 341 posts
Likes Given: 420
Joined: Nov 2019
Reputation:
20 06-Nov-2020, 12:48 AM (This post was last modified: 06-Nov-2020, 12:50 AM by jasperfpv.) It should fit without decasing the Vista unit. I had fitted vista in a frame with less height than the Cygnet 3.
The Dji camera width is 20mm while the Cygnet take 19mm cam. If you use Nebula Nano, you will need adaptor to fit.
• Posts: 731
Threads: 20
Likes Received: 490 in 341 posts
Likes Given: 420
Joined: Nov 2019
Reputation:
20 I'm not home at the moment to measure it but I don't think it is very deep behind the camera mounting hole. Dji official site listed the depth as 22.1mm.
Posts: 731
Threads: 20
Likes Received: 490 in 341 posts
Likes Given: 420
Joined: Nov 2019
Reputation:
20 No worries. The cap is for the 4 in 1 ESC.
• Posts: 6,160
Threads: 172
Likes Received: 2,298 in 1,845 posts
Likes Given: 4,755
Joined: Feb 2019
Reputation:
103 08-Nov-2020, 04:48 PM (This post was last modified: 08-Nov-2020, 04:48 PM by hugnosed_bat.) i guess the question about deceasing should be different, why should there be any heatsink added? i see no reason on a quad.
there are vtx with a fan, i can not beleive this either, probably im wrong?
• Posts: 21,416
Threads: 595
Likes Received: 9,039 in 6,690 posts
Likes Given: 1,428
Joined: Jun 2018
Reputation:
796 Yes, GEPRC support don't seem to be particularly good in my experience.
I've been trying to get hold of the STL files for the 3D printed parts that come with their Mark4 frame. First I was told that ALL the engineers had just gone on a whole month of annual leave. I guess it's nice for some. Then when I chased it up a month later they replied saying they would send me the printed parts with my next order. That was NOT what I asked for. Now they've apparently passed my request to their engineers again. I'm not going to hold my breath.
•