Posts: 4,550
Threads: 38
Likes Received: 1,245 in 1,064 posts
Likes Given: 430
Joined: Aug 2020
Reputation:
118 I guess Skyzone rushed the release of the Cobra X and forgot to design the earphone jack unless they were unable to reliably fit it in the pcb design.
This was not their first google and its a surprise they didn’t realize including such a feature.
• Posts: 1,489
Threads: 92
Likes Received: 574 in 468 posts
Likes Given: 0
Joined: Nov 2020
Reputation:
27 FYI
Snow melted in april and since then I used the Cobra X about 8-10 times, relatively problem free.
I only had hot battery, very short battery life happen once. Power off, swapped battery and it was OK.
I am using Sanyo 3500mah GA. I estimate 40min, maybe less with DVR recording. I swap out when OSD shows yellow low battery. At home, the 18650s charge aboit 1600-1800mah... ie half capacity.
These goggles dont like "saggy" 18650 like Samsung 3000mah 30Q. You need lion that maintains high voltage under load.
I have bunch of LG MJ1 3500mah, but havent tested them.
Im also considering 3D printing adapter for 26650 (5200-5500mah!!!) or 21700.
Posts: 6
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 1
Joined: Oct 2021
Reputation:
0 great to hear some people could enjoy the goggles i couldn't, skyzone "support" are not willing to repair the v1 goggles, i was very patient with them, until my patient ran out, i resend all the emails to getfpv where i bought the goggles, they respond that were very sorry for what i passed with the product and they refund me all the amount!!!
I bought some 1.3ghz stuff and i am waiting for the release of the new fatshark googles.
I am not going to buy anything from skyzone again
• Posts: 157
Threads: 30
Likes Received: 45 in 32 posts
Likes Given: 60
Joined: Jul 2020
Reputation:
1 The goggles are supposed to charge the internal battery, right? At least I remember them doing it in the beginning but now it doesn't seem to work. No lights light up to indicate charging.
•