26-May-2020, 01:27 AM
***BEWARE*** FrSky ACCST D16 2.x.x Firmware |
26-May-2020, 02:16 AM (26-May-2020, 01:27 AM)bffigjam Wrote: Might be onto something... Waiting to hear back, hold tight Sorry for the triple post. I have "Acquired" the last pre-v2.0 version and added it at the bottom of the list on my site. https://davesdronedesigns.com/frsky-firmwares/ (Turns out frsky will email it to you if you send a contact request in asking for it, I wrote a sob story about how I couldnt fly my new tiny whoop and they replied with it) 26-May-2020, 09:40 AM (26-May-2020, 02:16 AM)bffigjam Wrote: Sorry for the triple post. I have "Acquired" the last pre-v2.0 version and added it at the bottom of the list on my site. Well done. Maybe we need to have a sob story template that we can just use in future TBH, FrSky should just put a link to this firmware on the XJT Lite download page. They do it for all the other modules and receivers but just not the that particular one for whatever reason. 03-Nov-2020, 04:10 PM what firmware for accstd16 xjt module matches R-XSR firmware 171009 03-Nov-2020, 06:02 PM 03-Nov-2020, 10:13 PM (03-Nov-2020, 04:10 PM)Rob3ddd Wrote: what firmware for accstd16 xjt module matches R-XSR firmware 171009 XJT v.170317 is the 2nd last download on my page, it should work perfect in your case. https://davesdronedesigns.com/frsky-firmwares/ (26-May-2020, 02:16 AM)bffigjam Wrote: Sorry for the triple post. I have "Acquired" the last pre-v2.0 version and added it at the bottom of the list on my site. Any chance you have the X9D Plus non 2019 pre 2.x.x? The one with flipping switch from 2016 haha, I accidentally knocked out my xm+ bind to a whoop sadly 18-Dec-2020, 06:38 PM (18-Dec-2020, 06:14 PM)Chanted Wrote: Any chance you have the X9D Plus non 2019 pre 2.x.x? The pre-2.x.x ACCST firmware for the internal XJT module in an X9D+ ACCST transmitter is still available on the FrSky website. Just click the following link to download it... https://www.frsky-rc.com/wp-content/uplo...170317.zip 18-Dec-2020, 10:01 PM (18-Dec-2020, 06:38 PM)SnowLeopardFPV Wrote: The pre-2.x.x ACCST firmware for the internal XJT module in an X9D+ ACCST transmitter is still available on the FrSky website. Just click the following link to download it... Cheers mate, I did try flashing that but I still can't bind to either of my XM+s, One in the CrazyBee and other in a Delta wing. Also my back S-Port on the TX itself is stating its not detecting any module for the XM+ when plugged in correctly so unable to flash the RX without the adapter 18-Dec-2020, 10:10 PM (18-Dec-2020, 10:01 PM)Chanted Wrote: Cheers mate, I did try flashing that but I still can't bind to either of my XM+s, One in the CrazyBee and other in a Delta wing. Which type of the pre-2.x.x ACCST firmware did you install on your X9D+? The EU-LBT or FCC version? And which exact version number and type of firmware did you install on the XM+ receivers? (18-Dec-2020, 10:10 PM)SnowLeopardFPV Wrote: Which type of the pre-2.x.x ACCST firmware did you install on your X9D+? The EU-LBT or FCC version? And which exact version number and type of firmware did you install on the XM+ receivers? Thanks for all the help, I've got my TX and RX binding now however another issue is faced. It's like non stop now for FrSky haha. I get a "Firmware Update error no module found" when trying to flash my XM+ through the back SPort module VIA Flash to External - Is that no longer available or would that be an internal problem? I am trying to flash the FCC RSSI16 to it but hitting a wall harder than a fly smelling sh*t Right now it's working under Non EU FCC without RSSI sadly I've not actually installed any firmware yet into the XM+ as I haven't got the FUC3 and other adapters so I was hoping the S Port at the back would work sadly so I believe its the stock FCC as the FCC firmware i placed back onto the TX binds with no issues mate. Sorry about all the problems, I'm quite new to be honest when it comes to the FrSky Taranis X9D Plus aha. 19-Dec-2020, 10:32 AM (19-Dec-2020, 01:22 AM)Chanted Wrote: I get a "Firmware Update error no module found" when trying to flash my XM+ through the back SPort module VIA Flash to External - Is that no longer available or would that be an internal problem? Is your XM+ still wired to an FC when you try to flash the firmware to it? If so then you at least need to de-solder the 5V wire between the XM+ and the FC otherwise you will get issues. To be 100% sure of no issues just de-solder it from the FC completely in order to flash it. 18-Jun-2021, 01:23 PM (16-Apr-2020, 12:46 AM)bffigjam Wrote: Quick Update on this. Thank you so much 18-Jun-2021, 05:45 PM If Frsky had any brains about them.. they would have made the new update compatible with ALL their older (non updated) RXs.. ALONG with D-8. Yes, other companies make spi D-8 RXs and they loose a few $$s... HOWEVER.. this direction they are going they are loosing customers.. |
« Next Oldest | Next Newest » |
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Spectrum USB programmer to update Frsky rx? | baevans11 | 8 | 224 | 23-Apr-2024, 01:24 PM Last Post: baevans11 | |
Announcement TBS Crossfire / Tracer 6.33 Firmware Released | SnowLeopardFPV | 84 | 41,870 | 15-Apr-2024, 11:27 AM Last Post: SnowLeopardFPV | |
Help Frsky XM+ Firmware versions | Steak-9 | 3 | 158 | 26-Mar-2024, 01:28 PM Last Post: Steak-9 | |
Help FrSky r xsr receiver not entering bind mode | August | 1 | 109 | 05-Mar-2024, 08:49 PM Last Post: August | |
Help FrSky Archer RS to Speedybee F405V4 through F.Port | trecords | 0 | 131 | 28-Jan-2024, 09:10 PM Last Post: trecords |