Just picked up a BetaFPV Advanced Kit 2 and am having a lot of fun with it. After diving into the OSD settings, I am somewhat confused. There is a lot of inconsistency between what I've seen in online videos and what I actually have. Watched one video that showed how to adjust the Smartaudio settings to increase VTX power, but that setting isn't available on mine. So I visited the product page and found the manual for the Lite 1S FC, but it turns out that my quad actually has a Lite 1-2S FC. So I found the product page for that, but no manual. The product page states that Smartaudio is supported, but it's nowhere to be seen on my OSD.

So I'm not quite sure what I actually have and what it's capable of. I've attached photos of all my OSD settings. Switching to Advanced mode is tricky, you have to move the stick around until it decides to switch. Once it does switch, a lot of other options show up.

Would someone mind briefly explaining some of the advanced settings? I've been able to read up a bit on rates, PID, RX modes, and frequency settings. It's the Motor options that I'm completely clueless on and would like to know more about.

Am I supposed to have the Smartaudio option? Is there a firmware update I'm behind on? Are there any settings I should try tweaking to get the most out of this kit? It's really sensitive on the altitude, which I've heard is normal on these smaller whoops. I've been flying toy-grade and a DJI Phantom 3 for years, but the FPV side of it is all new to me. Any insight is appreciated. Thanks!

That whoop runs LiteSilverware (developed by BetaFPV) and not Betaflight. Not many of us here familiar with that firmware and OSD menu.

There is a link to the manual and support on github: https://github.com/BETAFPV/LiteSilverwar...s%20FC.pdf

(20-Jul-2021, 07:11 AM)kafie1980 Wrote: That whoop runs LiteSilverware (developed by BetaFPV) and not Betaflight. Not many of us here familiar with that firmware and OSD menu.

There is a link to the manual and support on github: https://github.com/BETAFPV/LiteSilverwar...s%20FC.pdf

Thanks. I think I had run across that manual, but my OSD looks different than what's shown there and doesn't have all the functionality that is mentioned.

BetaFPV Advanced Kit 2 runs custom Silverware. They have multiple different versions based on when it was released.

I have an older version that doesn’t match that manual at all. I once found a PDF for the version I had, but can’t find it anymore. My version allows me to switch VTx power.

It isn’t surprising that your doesn’t match. It is definitely closer than what I had.

(20-Jul-2021, 10:41 PM)ax3141 Wrote: BetaFPV Advanced Kit 2 runs custom Silverware. They have multiple different versions based on when it was released.

I have an older version that doesn’t match that manual at all. I once found a PDF for the version I had, but can’t find it anymore. My version allows me to switch VTx power.

It isn’t surprising that your doesn’t match. It is definitely closer than what I had.

Good to know. Thanks for sharing. I've seen a few mentions of a "Black Friday version" as well, maybe that's what I ended up with.