Posts: 17
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2017
Reputation:
0 fftunes: sorry, you are correct, it was a typo. I've had 1 and 2 and 3 and 4 on my mind since this has been going on haha.
Matt: I could't get the x8r to work so thankfully I like to have backups of different things and the x4r worked like a charm once I got everything switched over on the board and setup port three for serial rx. Also selecting the correct stuff under the configuration tab under receiver.
Renov8r: If the quad is facing forward the arrow on the board is facing left between motors 3 and 4.
• Posts: 17
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2017
Reputation:
0 Is it possible this thing is in some sort of mode by default that is causing these issues on lift off?
• Posts: 1,773
Threads: 30
Likes Received: 1,199 in 755 posts
Likes Given: 714
Joined: Oct 2016
Reputation:
45 Flight modes (rate, angle, horizon airmode) need to be set up in the modes tab. Have you done this?
• Posts: 2,416
Threads: 51
Likes Received: 1,861 in 1,175 posts
Likes Given: 3,315
Joined: Mar 2016
Reputation:
74 In your earlier screenshots, you have both yaw alignment and mag adjustment set. Don't use both (I usually just use yaw alignment).
• Posts: 23
Threads: 4
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Jan 2017
Reputation:
0 I got the RTF wizard 220 and it flew good but I reset the RX and now when I bind it I can't get the RX to transmit even on betaflight the bars don't move what do you think is wrong then anygiven60? I have a FS-iA6B 2.4 Ghz 6 ch receiver and a fly sky fsi6 remote control
• Posts: 1,290
Threads: 67
Likes Received: 713 in 473 posts
Likes Given: 1,216
Joined: Mar 2016
Reputation:
23 gyro and/or accel?
"Damn the torpedoes!!! Full speed ahead!!!"
• Posts: 17
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2017
Reputation:
0 Im thinking not having set the modes may very well be the issue, I could be wrong. Anyone have any place I can read up on this? No idea what I'm doing for modes.
I tried just the yaw adjustment last night on bench testing and the same issue was present.
• Posts: 23
Threads: 4
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Jan 2017
Reputation:
0 I can't set mods because my radio won't connect
• Posts: 947
Threads: 66
Likes Received: 350 in 248 posts
Likes Given: 164
Joined: Apr 2016
Reputation:
34 I have had a similar issue with a fs-ia6b. I could not rebind it. I did a lot of research, but at the end of the day I had to get a new receiver.
• Posts: 17
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2017
Reputation:
0 02-Feb-2017, 03:53 AM (This post was last modified: 02-Feb-2017, 03:54 AM by anygiven60.) So I have flashed with the newest version and started from scratch. Setup everything using these videos as a guide and I still have the same issue. 1 and 2 just increase in throttle while 3 and 4 decrease. I have air mode, horizon and angle all setup as well. I don't know what else to do. Maybe I've got bad wiring? No idea.
•