19-Jan-2023, 12:46 AM
Hi everyone,
RC newbie here. Can you guide me to understand and wire my electronics for my first fixed wing (ZOHD Talon 250g).
Although this might be stupidly simple for most of you, I am bit confused wiring my PWM receiver (Matek ELRS R24-P) to Kopilot.
R24-P has total 5x3 pins (5 PWM outputs) unlike most - 6x3 pins (5CH + 1 BAT). It doesn't have CH markings, but rather marked as (1 - Boot / 2 - Tx / 3 - Rx / 4 - IO9 / 5 - IO10).
So, should I place 3pin connector verticaly to RX CH1 Boot, and 4pin connector next to it - horizontally on CH2,3,4,5)?
Thanks everyone!
RC newbie here. Can you guide me to understand and wire my electronics for my first fixed wing (ZOHD Talon 250g).
Although this might be stupidly simple for most of you, I am bit confused wiring my PWM receiver (Matek ELRS R24-P) to Kopilot.
R24-P has total 5x3 pins (5 PWM outputs) unlike most - 6x3 pins (5CH + 1 BAT). It doesn't have CH markings, but rather marked as (1 - Boot / 2 - Tx / 3 - Rx / 4 - IO9 / 5 - IO10).
So, should I place 3pin connector verticaly to RX CH1 Boot, and 4pin connector next to it - horizontally on CH2,3,4,5)?
Thanks everyone!