(23-Aug-2020, 06:08 PM)finnigan Wrote: i just hovered fo few minutes in my sleeproom 
I copied the Liang's indications for  the tuning: i used a 650mah lipo and pitchy gemfan props.

RC Rate – 0.8
RC Expo – 0

Super Rate – 0.65

In a so tight space i haven't crashed and i haven't tried nothing but a hovering in the 5x5 room.

During the flight i must adjust the trottle because of battery decharging:
there's a way to balance the throttle power when the battery is getting low?

There is a feature in BF 4.2 called voltage sag compensation.

https://github.com/betaflight/betaflight/pull/9561

(23-Aug-2020, 07:25 PM)voodoo614 Wrote: There is a feature in BF 4.2 called voltage sag compensation.

https://github.com/betaflight/betaflight/pull/9561

This one, yes.
Thank you so much, my friend

I have set the parameters and -more- i worked on the throttle curve on my Radio. 
Now the Tyro is well tuned, smooth and more friendly.
I  received the  new cam and i could attempt some flights, because i got also two new 850mah batteries.

But not: the charger is just burnt out and he's very dead.
The noob's life is really hard.

[EDIT]

The cam is broken, poor thing, the Eachine's cam cable is pure XXap and i fixed it, bending in a curve, I'll replace it asap.

The 1020 Foxxer microcam is SWEET: for less than 30EU i received a nice jewellery-style box with the cam, cables, a lot of screws annd spacers plus the  control board that could be connected to the B-W cable.
The image is very clear and my goggles aren't so crappy: i can wear my glasses and i have a movie theatre feeling, i should try all the stuff asap. I need a new charger!!!

Did anyone solve that problem with gps? I connected everything correctly tx to rx rx to tx and 5v and GND but Betaflight doesn’t show that there is a gps connected at all!

(24-Jan-2021, 04:22 AM)itsokdeh Wrote: Did anyone solve that problem with gps? I connected everything correctly tx to rx rx to tx and 5v and GND but Betaflight doesn’t show that there is a gps connected at all!

I think his original issue with the gps was that there weren't enough uarts to attach it to and the softserial connection was too slow to use effectively.  He may have scrapped it.  With that being said however, did you select GPS in the Configurations tab for the correct uart in betaflight?  I forgot to do that on my first gps module and it drove me crazy!  lol