17-Feb-2016, 06:33 PM
Weight without battery and HD cam is 316g. The build turned out pretty and quite fun to fly without HD camera. Motors are T-Motors 1806 KV2500 test samples. They fly good on 4S even with DAL T4045BN tri-blades. The HD camera weight makes it feel a bit heavy, but still ok for casual flights.
Build
Frame: QAV 180
PDB: Birdseye Mini 36mm V1.2 PDB
Flight Controller: SPRacingF3 with Betaflight 2.1.6
Motors: Tiger Motor 1806-13 KV2500 test samples
ESCs: LittleBee 20A ESC with BLHeli 14.4 (Damped Light and Oneshot enabled)
Radio: FrSky d4r-ii
FPV
Video TX: Eachine ET600 5.8G 32CH 600mW
FPV Camera: Pyro Drone 1/3 Sony Super HAD II CCD 650
OSD: MinimOSD with MultiWii firmware
Misc
Battery: 4S LiPo MultiStar Race Spec 4S 1400mAh 40-80C or Lumenier 1000mAh 60C, 1300mAh 60C, 1500mAh 45CV
Propellers: Usually 4045BN DAL or tri-blade
HD Camera: none
LuxFloat PID Controller
PIDs and current specs: http://jaisor.net/index.php/multirotors-...13th-2016/
Flights
BetaFlight 2.3.5 2KHz Mode
BetaFlight 2.1.6 Tuned
Build
Frame: QAV 180
PDB: Birdseye Mini 36mm V1.2 PDB
Flight Controller: SPRacingF3 with Betaflight 2.1.6
Motors: Tiger Motor 1806-13 KV2500 test samples
ESCs: LittleBee 20A ESC with BLHeli 14.4 (Damped Light and Oneshot enabled)
Radio: FrSky d4r-ii
FPV
Video TX: Eachine ET600 5.8G 32CH 600mW
FPV Camera: Pyro Drone 1/3 Sony Super HAD II CCD 650
OSD: MinimOSD with MultiWii firmware
Misc
Battery: 4S LiPo MultiStar Race Spec 4S 1400mAh 40-80C or Lumenier 1000mAh 60C, 1300mAh 60C, 1500mAh 45CV
Propellers: Usually 4045BN DAL or tri-blade
HD Camera: none
LuxFloat PID Controller
PIDs and current specs: http://jaisor.net/index.php/multirotors-...13th-2016/
Flights
BetaFlight 2.3.5 2KHz Mode
BetaFlight 2.1.6 Tuned