09-Aug-2023, 11:16 AM (This post was last modified: 09-Aug-2023, 11:18 AM by Damp_Cabbage.)
Hi all,
I have a Speedybee F7 V3 flight controller that is not recognising my reciever. The TBS nano is paired with my controller (it shows a solid green light) but i get the arming flag "RX_FAILSAFE" "no valid reciever signal detected"
I had a pretty heavy crash on my last flight and ive have the probelm ever since. Ive checked the soldering/wires and all seems fine. Any help would be appreciated
Ive attached my CLI dump. my rx is currently wired to UART3. It was previously on UART2 but with the same results.
I have a Speedybee F7 V3 flight controller that is not recognising my reciever. The TBS nano is paired with my controller (it shows a solid green light) but i get the arming flag "RX_FAILSAFE" "no valid reciever signal detected"
I had a pretty heavy crash on my last flight and ive have the probelm ever since. Ive checked the soldering/wires and all seems fine. Any help would be appreciated
Ive attached my CLI dump. my rx is currently wired to UART3. It was previously on UART2 but with the same results.