Posts: 5,322
Threads: 673
Likes Received: 3,159 in 1,747 posts
Likes Given: 2,032
Joined: Jan 2016
Reputation:
139 sounds it's not arming!
first of all, are you using betaflight? if so... with 2Khz mode, if you running too many things on the Naze32 it won't let you arm... try to disable ACC or go back to 1Khz
secondly, could you try to calibrate ACC if you have it enabled?
• Posts: 119
Threads: 9
Likes Received: 9 in 4 posts
Likes Given: 0
Joined: Mar 2016
Reputation:
2 Also make sure your throttle goes below min check. If you don't have the throttle range of 1000-2000, you can trim the at9 in the menu under "end points". I had to trim mine pretty far to get the right values.
• Posts: 14
Threads: 4
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2016
Reputation:
0 Thanks guys. Ill check when I get back to the house.
OSCAR - I flashed BetaFlight, but am using cleanflight interface because changes made in headlight do not save when I change screens. Yes I do not save, lol. I have not adjusted anything with a KHz mode (that I know of). Calibrating the Accelerator was one of the first things I did.
Bangkok- I'll check all that asap. Thanks
• Posts: 14
Threads: 4
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2016
Reputation:
0 OK, Looks like Minimum Throttle is set to 1150, and Receiver shows 1073. I adjusted the END-POINT and got it down to an even 1000.
After typing that last sentence I went to see if the "max throttle" was affected, and when I moved the throttle stick up, the motors spun up and scared the CRAP out of me! lol.
Looks like I'm good to go. THANKS GUYS!!
Now I just have to figure out why the FC made an audible "BEEP BEEP" and then the ESC on motor #1 blew. Or So I'm assuming as that motor will no longer spin up or make noise when the system starts up. Good thing i like tinkering. lol
• Posts: 5,322
Threads: 673
Likes Received: 3,159 in 1,747 posts
Likes Given: 2,032
Joined: Jan 2016
Reputation:
139 I always assume the most complicated problem and forget the simplest fix hehe, thanks guys!
• Posts: 4
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2016
Reputation:
0 Crazy how that happens! 80% of my FPV problems have an easy solution that isn't always obvious haha!
•