08-Mar-2024, 10:09 PM
Hello,
I have a problem with connecting digital VTX Walksnail V1 to GEP-F411-35A AIO ( Cinelog30 with Analog VTX previous )
After connected BF 4.3 and executed the command in the CLI responsible for activating VTX (MSP + Displayport)
set osd_displayport_device = MSP
set displayport_msp_serial = 0 ( my UART1 on F411 FC )
and SAVE
I have to disconnect and reconnect the USB to the computer after restarting the FC and I don't have any visible new
settings in Peripheral Devices VTX (MSP + Displayport)
I also tried the same settings on other UARTs, and the same result. No VTX (MSP + Displayport) options.
I'm trying to avoid uploading a higher version of BF to FC.
Do you have any other ideas what I could be doing wrong?
I tried on another computer with BF and the same results.
Adam0880
I have a problem with connecting digital VTX Walksnail V1 to GEP-F411-35A AIO ( Cinelog30 with Analog VTX previous )
After connected BF 4.3 and executed the command in the CLI responsible for activating VTX (MSP + Displayport)
set osd_displayport_device = MSP
set displayport_msp_serial = 0 ( my UART1 on F411 FC )
and SAVE
I have to disconnect and reconnect the USB to the computer after restarting the FC and I don't have any visible new
settings in Peripheral Devices VTX (MSP + Displayport)
I also tried the same settings on other UARTs, and the same result. No VTX (MSP + Displayport) options.
I'm trying to avoid uploading a higher version of BF to FC.
Do you have any other ideas what I could be doing wrong?
I tried on another computer with BF and the same results.
Adam0880