19-Feb-2016, 09:18 PM
My minimosd was acting up so I decided to flash it.
Connected it using FT232RL, installed Arduino (1.6.7), installed FT driver - it discovers it fine.
Hooked it up to my laptop - the light blinks green for a while then Arduino spits out:
"avrdude: stk500_recv(): programmer is not responding"
If its not responding why is it blinking green?
Spent few hours on it already; no luck. Didnt find anything on the web that could help me. Tried different drivers - nothing. Board type is selected fine, so is the port.
Cable seem fine since its blinking green..
When I was rolling back the drivers to 2.10 I only did so for "USB Serial Port" and not "USB Serial Converter"
Did that now - no luck.
Anything else I could try?
Connected it using FT232RL, installed Arduino (1.6.7), installed FT driver - it discovers it fine.
Hooked it up to my laptop - the light blinks green for a while then Arduino spits out:
"avrdude: stk500_recv(): programmer is not responding"
If its not responding why is it blinking green?
Spent few hours on it already; no luck. Didnt find anything on the web that could help me. Tried different drivers - nothing. Board type is selected fine, so is the port.
Cable seem fine since its blinking green..
When I was rolling back the drivers to 2.10 I only did so for "USB Serial Port" and not "USB Serial Converter"
Did that now - no luck.
Anything else I could try?