Anyone else running Lux F3 flight controller? Haven't re-flashed from the Colibri that's loaded on it but it is updating in Cleanflight VERY slowly. 

Anything, the Gyro status, CLI dump, super slow and jumpy, like it can't keep up with the data. Haven't tried a different USB cable but no reason why it would work fine on all my F1 boards and not on an F3 heh. Tried calibrating acc since that causes it sometimes, didn't fix.

there are 4 i2c errors immediately upon connecting as well.

Don't worry about the errors Michael, the TBS Powercube is exactly the same with F3 and colibri race software. And yes it sometimes even responds slowly in cleanflight. I think it may be a usb 2.0 / 3.0 thing, or just random graphics glitch it causes in cleanflight, but the board itself is very responsive.

(09-Mar-2016, 02:29 AM)SkinnyShark Wrote: Don't worry about the errors Michael, the TBS Powercube is exactly the same with F3 and colibri race software. And yes it sometimes even responds slowly in cleanflight. I think it may be a usb 2.0 / 3.0 thing, or just random graphics glitch it causes in cleanflight, but the board itself is very responsive.

I would think if that were the case it would be posted that it could run really slow in GUI. I'm sure it does work but it's kind of dumb that it would do this

can't even reflash. every time i go to flash it reboots to DFU and nothing happens.