Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Video not working now
#1
So I wrecked my flywoo explorer and now the video only works when I’m 3 feet from the drone and pointed straight at it ....I replaced the antenna (bc I had one handy) still only works three feet from quad ....I checked all wires everything seems fine ...wasn’t a hard crash but ended upside down ...any help would be appreciated
Reply
Login to remove this ad | Register Here
#2
“So I wrecked my fly woo explorer...”. These components don’t say “Tonka” on them.. some crashes that will make u cringe only breaks props, others “not hard” or “didn’t seem bad”.. end up having some electronic component as collateral damage... I’ve seen FCs let out “magic smoke” from a single blade of grass...
Reply
#3
(30-May-2021, 08:34 PM)Rob Axel Wrote: “So I wrecked my fly woo explorer...”. These components don’t say “Tonka” on them.. some crashes that will make u cringe only breaks props, others “not hard” or “didn’t seem bad”.. end up having some electronic component as collateral damage... I’ve seen FCs let out “magic smoke” from a single blade of grass...

Ok thanks I’ll try that
Reply
#4
Can you check smart audio RX wire connection to the vtx and FC?

Perhaps the vtx is stuck in pitmode. Try and manually set the power using the button function and confirm that the led flashes are indicating the correct power level.
Reply
#5
If that doesn’t work (button on vtx) try setting it in betaflight..
Reply
#6
This is what it says in beta I changed vtx an went back in an still says this
Reply
#7
looks like is time for a new Vtx, Akk and rush make some nice ones.
I only know that i know nothing 
Reply
#8
..rush "yes"..AKK, not so much.... honestly Ive got better performance from a $14 Panda rc than a $30 AKK... Just my $.02
Reply
#9
(31-May-2021, 05:32 AM)rolo95 Wrote: looks like is time for a new Vtx, Akk and rush make some nice ones.

So I was gonna jus get the same one that came on it ...but I’ll get a better one ..I jus don’t know what a better one is ...do I have to look for one that only draws this much power etc.....could you show me what would work ...should I get a 1000 watt for long range or like I said jus get the same one that came on it
Reply
#10
1000watt is a bit too much :-) 1watt is still plenty power ;-)
as example 400mw is still alot a could work for miles.

it depends on your radio gear, if you dont have crossfire or another lr radio gear - 200mw might still outperfrom your radio link than.
Reply
#11
I have tango 2
Reply
#12
a tbs unify makes sense in combination
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  How are people getting 30kilometers of video range? Rob3ddd 23 7,411 27-Aug-2022, 02:26 AM
Last Post: V-22
  Dude for my signal video helical 7 turn and truer x2 air Foxer_125 10 851 14-Oct-2021, 12:13 AM
Last Post: Foxer_125
  Frequency of radio and video links khiemmessier27 4 650 10-Aug-2021, 03:00 PM
Last Post: romangpro
  Video 25mW, maximum distance under 100m The Red Baron 8 758 07-Jul-2021, 08:21 PM
Last Post: The Red Baron
Question Discussion antenna placement - forward/backward video quality hugnosed_bat 5 1,454 24-Jun-2021, 03:09 PM
Last Post: hugnosed_bat


Login to remove this ad | Register Here