30-Jan-2024, 11:10 PM
I feel like I'm going crazy here. I spent a solid 2 hours going through teaching myself how betaflight works, what COM ports are, how to connect my FC to the PC via Betaflight, downloaded and used the Impulse RC Driver Fixer,etc etc. I have struggled to get this working and finally got it to the point where it was correctly showing up as usb_hid_cdc = on which is what all the tutorials say is the final step. My issue is that this seemingly has done NOTHING. The transmitter does not show up as a controller on Windows (In the Game Controllers settings window) and doesnt show up in my Sim or on Steam.
I have googled this a million different ways and everyone seems to either have issues with getting the transmitter to be recognised by Betaflight (which I know isnt my problem because it is showing the inputs correctly), or forgetting to do the little CLI command, BUT NOT THIS. What am I missing? I'm tearing my hair out here.
I have tried updating my firmware, 2 different ways (using the Online automatic method, and by finding a file from a tutorial to manually upload). I then struggled to rebind my transmitter but I finally got that going again. I lost and found one of the tiny screws I needed to remove because I couldnt find something that could reach the BIND button. I hate this so much.
Please help me I'm losing my mind. 4 hours on this, I just want to be frustrated at my flying ability, not this impossible tech troubleshooting nonsense.
I'm using a Tinyhawk2 with E6 transmitter. My Tinyhawk is connected to the PC with a usb controller, the transmitter is not. The transmitter is fully charged and has a solid green light. The inputs from it are all correctly showing on Betaflight.
I have googled this a million different ways and everyone seems to either have issues with getting the transmitter to be recognised by Betaflight (which I know isnt my problem because it is showing the inputs correctly), or forgetting to do the little CLI command, BUT NOT THIS. What am I missing? I'm tearing my hair out here.
I have tried updating my firmware, 2 different ways (using the Online automatic method, and by finding a file from a tutorial to manually upload). I then struggled to rebind my transmitter but I finally got that going again. I lost and found one of the tiny screws I needed to remove because I couldnt find something that could reach the BIND button. I hate this so much.
Please help me I'm losing my mind. 4 hours on this, I just want to be frustrated at my flying ability, not this impossible tech troubleshooting nonsense.
I'm using a Tinyhawk2 with E6 transmitter. My Tinyhawk is connected to the PC with a usb controller, the transmitter is not. The transmitter is fully charged and has a solid green light. The inputs from it are all correctly showing on Betaflight.