Posts: 56
Threads: 22
Likes Received: 5 in 4 posts
Likes Given: 4
Joined: Jun 2016
Reputation:
0 I am looking for a PDB integrated FC, I am deciding between the Motolab Tempest FC and the Furious KOMBINI FC.
Anyone have any experience with either? Maybe can Sway me in one direction or another. I have always flown Naze32 I want to try and get away from the older technology.
• Posts: 69
Threads: 28
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Apr 2016
Reputation:
0 Those Corner Tabs on the Kombini are likely to snap in crashes, just like KISS FC does.
• Posts: 88
Threads: 39
Likes Received: 5 in 4 posts
Likes Given: 0
Joined: Mar 2016
Reputation:
0 Loving the simplicity of the tempest on my racer. I did blow out the LC filter output in a crash when a motor grenaded and 2 escs died. Switched to the 5v pin next to it, never had a other problem. Runs 4k/4k great.
• Posts: 55
Threads: 24
Likes Received: 6 in 5 posts
Likes Given: 3
Joined: Feb 2016
Reputation:
1 The Kombini has a port on it which connects to their new Piggy osd which will then allow you to tune your PIDs through your osd I believe
The tempest is also a bit larger than the regular FC... something to consider if you are running a build with tight spacing (a pod etc) as it may not fit.
• Posts: 5
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2016
Reputation:
0 Hi all, need some advise here. Am building a 5" X-frame that has a PDB as part of the frame and I have also purchased the kombini fc.
Question: Can I use the frame's PDB instead of kombini's? If this is possible, should I use one of the +5V & GND pads to power the FC up?
Appreciate your advise and many thanks in advance.
/hhover
•