This information comes from here:
https://www.facebook.com/TinyWhoopOfficial/ And is available in lots more detail here:
https://docs.google.com/document/d/1vftq...obilebasic But the pictures below attempt to summarize things (I believe these summary table where put together by tinywhoop.com which only sells mylipos...) I haven't checked the numbers and haven't looked into the testing methodologies all the much ... I still think it's worth checking them both out
That being said, I really like the mylipos I have. ALSO! I got a TinyWhoop board that supports telemetry
Tested it with the Eachine 30c 150 and 260mah batteries... and with an N of 1:
Running:
18kv motors
E010 Frame and props.
No FPV.
Initial hover tests show that just at HOVER the Eachine 30C batteries will sag to 3.4v for the first 30 seconds; 3.2v for the middle of the flight and for the last 45s-1m will sit nearly 2.8v - all this - just to maintain a hover WITHOUT fpv. Any punches dip well below 3.0v except in the very beginning of the flight. Haven't switched to the mylipos (still waiting on the connector). From observation, running the mylipos on another board (that doesn't support telemetry) I doubt the sag is nearly as bad. These same batteries actually make running the h8 outdoors with fpv tons of fun.... but the h8 is a lot lighter for starts.