15-May-2023, 03:36 AM
Hi all,
I'm putting a SpeedyBee F745 AIO in a Flight IH3. I want to connect the USB C module so I can do the initial set-up on my computer. I also want to switch to Blue Jay and will need to connect to the computer for that. I've attached the USB C module the aio came with, but I am not having any success connecting to Betaflight.
switched what USB C port I'm plugging into. I've tried other drones, and those plug in and are detected fine.
The D-, D+, and GND all on the right pads. I'm powering with the battery, then connecting the USB C to my computer. Nothing. I've tried different cables and even switched what USB C port I'm plugging into. I've tried other drones, and those plug in and are detected fine.
I'm not on here much now, but when I was first starting this place was real helpful! I've built dozens of drones at this point and consider myself a pretty competent, but this is my first time messing around with a USB port.
Any ideas out there?
I'm putting a SpeedyBee F745 AIO in a Flight IH3. I want to connect the USB C module so I can do the initial set-up on my computer. I also want to switch to Blue Jay and will need to connect to the computer for that. I've attached the USB C module the aio came with, but I am not having any success connecting to Betaflight.
switched what USB C port I'm plugging into. I've tried other drones, and those plug in and are detected fine.
The D-, D+, and GND all on the right pads. I'm powering with the battery, then connecting the USB C to my computer. Nothing. I've tried different cables and even switched what USB C port I'm plugging into. I've tried other drones, and those plug in and are detected fine.
I'm not on here much now, but when I was first starting this place was real helpful! I've built dozens of drones at this point and consider myself a pretty competent, but this is my first time messing around with a USB port.
Any ideas out there?