Posts: 2
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2021
Reputation:
0 Hello, I purchased a Skyzone Cobra X googles and a Tinyhawk II BNF drone. I'm getting bars running through the googles. Kind of looks like interference lines. I then purchased new antennas. A Lumenier AXII Patch and a Lumenier AXII 2 5.8GHz. And still have the same bars. I also get a constant RSSI Low message in the googles. Any suggestions?
• Posts: 4,550
Threads: 38
Likes Received: 1,245 in 1,064 posts
Likes Given: 430
Joined: Aug 2020
Reputation:
118 16-Aug-2021, 01:17 AM (This post was last modified: 16-Aug-2021, 01:18 AM by kafie1980.) A picture will help better understand the kind of bars you are mentioning.
Do you see the bars in the goggles with the quad un-powered?
It might be electrical interference on the quad or a bad video transmitter on the quad.
But it might be an issue with the goggle or with the VRX module.
• Posts: 4,550
Threads: 38
Likes Received: 1,245 in 1,064 posts
Likes Given: 430
Joined: Aug 2020
Reputation:
118 23-Aug-2021, 02:51 AM (This post was last modified: 23-Aug-2021, 02:51 AM by kafie1980.) If you are still seeing those bars amid the snow without the quad powered on then its probably you goggles.
If you are confident and can open the goggles up, then perhaps reseating all the connectors related to the display might help. Especially the connectors related to the screen.
•