Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
roninUAV Sohei Mk2
#16
Yup that's how I understand it too, Snow. Which is why I don't hesitate to use copyright music as I'm not out to monetize my YT channel. From the pittance I'm hearing folks with 100K subs receive off YT, it's just not worth it to me.

I view YT more as a free file sharing app much like Google Drive.
roninUAV | Purveyor of fine sub-250g FPV drone frames. «» FPV threads

Reply
Login to remove this ad | Register Here
#17
(08-Jan-2022, 12:34 AM)the.ronin Wrote: Yup that's how I understand it too, Snow.  Which is why I don't hesitate to use copyright music as I'm not out to monetize my YT channel.  From the pittance I'm hearing folks with 100K subs receive off YT, it's just not worth it to me.

I view YT more as a free file sharing app much like Google Drive.

Yeah, a claim just means that you won't see any money from the embedded ads. Which I don't believe you do until 1000 subscribers anyway. The only irritating bit is that your video can get blocked completely in some regions, but I've only seen that a couple of times.

The ground is for dead people.
[-] The following 1 user Likes Banelle's post:
  • the.ronin
Reply
#18
I can't believe this worked lol.   ROFL  SMO4K + HDZero in one of my Sohei's.  I went 450mAh 4S and it is way too small lol.  233AUW but I am still getting 3min of aggressive flight (5 min of cruising).  So I'm going to look into 550mah or 650mah HV.  But lol this is so awesome ...  Big Grin

roninUAV | Purveyor of fine sub-250g FPV drone frames. «» FPV threads

[-] The following 2 users Like the.ronin's post:
  • kaitylynn, iFly4rotors
Reply
#19
Cool Video.  Thumbs Up

Awesome Music, too.  Thumbs Up

Hey, watch out for that guy sittin' on the curb.  Big Grin
______________________________________
My BUILDS  ||   My INDEX   ||  Parts Guide  <-- Download


[-] The following 1 user Likes iFly4rotors's post:
  • the.ronin
Reply
#20
LOLLL thanks iFly   ROFL 

The Sohei is quickly becoming my favorite frame!  It's super tough but its smaller size means I can pile on random stuff on it lol.  Next up will be night vision AND 4K video lol.   Big Grin

I also think those lightweight GNB 660mah 4S lipos will be perfect for this particular build. Should put me right at about 245ish. The Tattu 450s I'm using in the video look freakishly small lol.
roninUAV | Purveyor of fine sub-250g FPV drone frames. «» FPV threads

[-] The following 1 user Likes the.ronin's post:
  • iFly4rotors
Reply
#21
Cool sunset tonight Big Grin 

roninUAV | Purveyor of fine sub-250g FPV drone frames. «» FPV threads

[-] The following 1 user Likes the.ronin's post:
  • iFly4rotors
Reply
#22
Got one of my Sohei's upgraded with the 3.5" arms and hoping to squeeze in some test flights tomorrow ... Big Grin

[Image: DSC-2896.jpg]

[Image: DSC-2894.jpg]

I had to resolder longer motor wires because of the added length of the arms and I stripped wires on one motor down to the windings.  I thought I had covered up a decent enough amount of the wire with heat shrink, but that motor is running hot in living room hovers.  So I'm just hoping for the best.

I am stoked that it's still coming in well below 250 even with a SMO 4K ...

[Image: DSC-2891.jpg]

You can expect to add about a gram for each arm along with the weight of heavier props and the added motor wire lengths.  Really not that much more than I expected.

Also, if you are looking to run hybrid, you are good to go ... 

[Image: DSC-2888.jpg] 


Thumbs Up
roninUAV | Purveyor of fine sub-250g FPV drone frames. «» FPV threads

[-] The following 4 users Like the.ronin's post:
  • Rob3ddd, hugnosed_bat, iFly4rotors, Lemonyleprosy
Reply
#23
Looks great! Can’t wait to hear about the test flights and see flight video!
Dangerous operations.

Disclaimer: I don’t know wtf I’m talking about.
I wish I could get the smell of burnt electronics out of my nose.
[-] The following 1 user Likes Lemonyleprosy's post:
  • the.ronin
Reply
#24
It is on bois!!   Big Grin 

[Image: sohei-mk2-arm3-5-1.jpg]
https://roninuav.com/shop/sohei-mk2-arm-pair-3-5/

So the good news is it flies rock solid.  The bad news is I did in fact screw up motor #3 when I was rewiring it.  I mentioned it ran a little warm during living test hover.  Well it finally gave out after a few hard juice flicks.  I've got a replacement on order but was hoping to make a video.  The extra power is immediately noticeable.  But I'm still on the fence if I'm going to keep it 3.5.  I kinda liked having the 3 and the 4 and keeping their flying characteristics very distinct.  This feels maybe too much like the 4 now.  We'll see once I get the new motors and get to fly it more.

Enjoy!!   Thumbs Up
roninUAV | Purveyor of fine sub-250g FPV drone frames. «» FPV threads

[-] The following 5 users Like the.ronin's post:
  • Rob3ddd, hugnosed_bat, Pathfinder075, iFly4rotors, Lemonyleprosy
Reply
#25
Not gonna lie.  These arms are a lot more funner than I expected.  Hadn't flown acro in a while and the performance of this setup was a pleasant surprise!!   Thumbs Up 

roninUAV | Purveyor of fine sub-250g FPV drone frames. «» FPV threads

[-] The following 4 users Like the.ronin's post:
  • Rob3ddd, hugnosed_bat, iFly4rotors, Lemonyleprosy
Reply
#26
Oh captain, my captain!!!!   Big Grin 

[Image: Screen-Shot-06-06-22-at-02-08-PM.jpg]

https://oscarliang.com/roninuav-sohei-mk2/
roninUAV | Purveyor of fine sub-250g FPV drone frames. «» FPV threads

[-] The following 4 users Like the.ronin's post:
  • hugnosed_bat, Oscar, iFly4rotors, Lemonyleprosy
Reply
#27
(06-Jun-2022, 10:11 PM)the.ronin Wrote: Oh captain, my captain!!!!   Big Grin 

[Image: Screen-Shot-06-06-22-at-02-08-PM.jpg]

https://oscarliang.com/roninuav-sohei-mk2/

It's a great frame i really enjoy building it Smile
thank you again Rob for sending me the frame!
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
[-] The following 4 users Like Oscar's post:
  • Pathfinder075, hugnosed_bat, the.ronin, iFly4rotors
Reply
#28
Did this fit 12x12 motors
[-] The following 1 user Likes BigBeard's post:
  • the.ronin
Reply
#29
Yes.  9x9 and 12x12   Sohei MK2 specifications on RoninUAV website.
______________________________________
My BUILDS  ||   My INDEX   ||  Parts Guide  <-- Download


[-] The following 1 user Likes iFly4rotors's post:
  • the.ronin
Reply
#30
Ahh they're sold out right now. I'm in the market, so I'll see if another load comes in this month ...


(09-Jun-2022, 11:16 AM)iFly4rotors Wrote: Yes.  9x9 and 12x12   Sohei MK2 specifications on RoninUAV website.
[-] The following 1 user Likes BigBeard's post:
  • iFly4rotors
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  A 4" build that never flew (The Ronin mk2 is alive!) drumgod 20 1,018 12-Dec-2023, 06:34 PM
Last Post: drumgod
  Build 3” roninUAV Sohei MK2 Lemonyleprosy 211 14,096 20-Aug-2023, 11:55 AM
Last Post: iFly4rotors
  Diatone c25 mk2 3d print Wolfplay 0 194 16-Aug-2023, 08:08 PM
Last Post: Wolfplay
  Build AOS 3.5 and a RoninUAV Sohei MK2 sevro 43 3,722 10-Jul-2023, 04:48 AM
Last Post: Pathfinder075
  Build 3.5” RoninUAV Sohei MK2 Lemonyleprosy 118 7,118 29-May-2023, 07:05 PM
Last Post: Lemonyleprosy


Login to remove this ad | Register Here