31-Aug-2021, 10:33 AM
I bought a ready assembled rekon 5 6s drone (analog version) and I have a problem - a can`t setting batterie voltage to OSD info.
In BF I have made all the settings, as in the instructions (Zeus F722 mini and Zeus VTX 800mW) - checkboxes are set in the OSD section, ports are configured, GPS data is transmitted, VTX grid is configured, internal ADC is selected, but there is no data about the battery and engine speed.
Maybe someone can send me their * .json settings file. I don't know what else to do.
I wrote off the problem to the manufacturer - he offers to send the FC for repairs, but this will take a very long time and sending from Russia to China is not advisable. Perhaps I missed something in the settings, I will also try to flash the FC again in the evening.
Now at OSD i saw 0.00v battery info.
In BF I have made all the settings, as in the instructions (Zeus F722 mini and Zeus VTX 800mW) - checkboxes are set in the OSD section, ports are configured, GPS data is transmitted, VTX grid is configured, internal ADC is selected, but there is no data about the battery and engine speed.
Maybe someone can send me their * .json settings file. I don't know what else to do.
I wrote off the problem to the manufacturer - he offers to send the FC for repairs, but this will take a very long time and sending from Russia to China is not advisable. Perhaps I missed something in the settings, I will also try to flash the FC again in the evening.
Now at OSD i saw 0.00v battery info.