05-Mar-2022, 08:21 PM
I just can't get this FC to talk to any Radio. First I tried it with my old sim remote, a FlySky FS6i and matching SBUS receiver, but no movement on the remote tab in Betaflight. Thought it might be a bug of the remote only talking on IBUS with that receicer even though both support SBUS and since the FC doesn't support IBUS I went on and got a Sprektrum DXs and SPM4650. Changed the FC Pad to DSMX and wired the reciever, still nothing. They seem to be bound because when the drone is plugged in the LED on the receiver lights up as soon as I power on the remote (old setup seemed to have been bound aswell).
Both receivers should be supported according to https://betafpv.com/products/toothpick-f...heli_32-v4
[url=https://betafpv.com/products/toothpick-f405-2-4s-aio-brushless-flight-controller-20a-blheli_32-v4][/url]
After some research here I think it might just be some CLI command to fix it but since I am very new and building this drone as an upgradeable gift (no FPV for now) for my small nephew (I fly a 5" T-Motor build with DJI) I just can't figure it out myself.
Here is the CLI Dump:
BTFL_cli_KianoDrone_20220305_192930 - dump 1.txt (Size: 27.69 KB / Downloads: 52)
Hopefully
MortiBear
Both receivers should be supported according to https://betafpv.com/products/toothpick-f...heli_32-v4
[url=https://betafpv.com/products/toothpick-f405-2-4s-aio-brushless-flight-controller-20a-blheli_32-v4][/url]
After some research here I think it might just be some CLI command to fix it but since I am very new and building this drone as an upgradeable gift (no FPV for now) for my small nephew (I fly a 5" T-Motor build with DJI) I just can't figure it out myself.
Here is the CLI Dump:
BTFL_cli_KianoDrone_20220305_192930 - dump 1.txt (Size: 27.69 KB / Downloads: 52)
Hopefully
MortiBear