25-Feb-2016, 04:00 PM
I have recently build my first Naze32 250 quad as follows:
EMAX Carbon Fibre 250 Sized Frame
DYS 1806 2300kv Brushless Motors
EMAX 12A ESC's - BLHeli
5" x 3" props
4S Lipo
I have MIN_THROTTLE set at 1200 as this is the lowest value at which all 4 props spin up. The trouble I have is that it generates too much thrust. As soon as the props spin up the quadcopter starts to lift off. I have tried calibrating the ESCs via the Naze32, but that does not seem to help. Are there any other suggestions, or should I drop to a 3S lipo?
Thanks
EMAX Carbon Fibre 250 Sized Frame
DYS 1806 2300kv Brushless Motors
EMAX 12A ESC's - BLHeli
5" x 3" props
4S Lipo
I have MIN_THROTTLE set at 1200 as this is the lowest value at which all 4 props spin up. The trouble I have is that it generates too much thrust. As soon as the props spin up the quadcopter starts to lift off. I have tried calibrating the ESCs via the Naze32, but that does not seem to help. Are there any other suggestions, or should I drop to a 3S lipo?
Thanks