I have been having problems controlling my BetaFPV 65 Pro 2 with my FrSky X-Lite S and with a lot of help here in the forums I was finally able to bind my whoop to my controller but I was still having problems with flying so I finally took some time and took all my gear to a local RC Hobby shop and they helped me fine tune my whoop so I could control it but I noticed that they used the Chrome plugin version of BetaFlight and not the installed program and I noticed that there were more options in the Chrome plugin than the software version. Has anyone else noticed the differences? Where I noticed my main differences was in the modes tab. In the software version I don't have any options, see picture 1, but in the Chrome Plugin version I can access all the modes available, see picture 2. Anyways I was wondering if anyone else was having this problem and if there other problems I am not aware of. Oh, and BTW, is there a good tutorial on how to use betaflight???

You usually get that behaviour in Betaflight Configurator if your flight controller has a pre-release (development) version of Betaflight 4.0 installed on it.

Please run the "version" command in the CLI tab and copy/paste the results back here.

@Snow. You can see his version in the photo.

4.0.0 (M41R)
MATEKF411RX

https://oscarliang.com/betaflight-config...t-loading/

In BF Configurator you get more commands if you turn on Expert mode.