Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Popping noise from motor
#1
I'm stumped. I'm going to start from the beginning but the stack is a 20x20 iflight f7 on a shendrone squirt frame. I did the exact same build on the same frame after a hawk attacked my drone. New flight controller, ESC and motors. Here's a video of the issue I'm having any input would be appreciated.

Reply
Login to remove this ad | Register Here
#2
Solved it, it's just a bad flight controller. Here is a video of the hawk that attacked my slammed squirt that started all this lol
[-] The following 1 user Likes epicjfpv's post:
  • UrbanJungle1966
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Motor/esc problem Axel 42 951 26-May-2024, 10:15 AM
Last Post: wizofwires
  Motor under water Eyes.fpv 5 169 04-May-2024, 05:16 PM
Last Post: SnowLeopardFPV
  What motor to choose on 3.5" cinewhoop? Fpv_Snidde 4 340 02-May-2024, 11:21 AM
Last Post: Fpv_Snidde
  protect motor wires Eyes.fpv 12 286 01-May-2024, 09:03 AM
Last Post: Eyes.fpv
Wink 0% throttle motor dsync when flipping? mojohoojo 3 108 26-Apr-2024, 05:13 PM
Last Post: mojohoojo


Login to remove this ad | Register Here