My baby crocodile w/Caddx vista came set up with OSD symbols but some symbols in goggles I don’t see in my betaflight OSD screen.


  Are there some OSD symbols/data in DJI goggles that can not be moved around?

 Also what data do I need to display so I can fly safely and keep track of drone vital signs.It’s a bit personal preference but knowing when it’s time to throttle down,fly home,lower altitude,signal strengths,etc...

The DJI FPV goggles can have two different, independent sets of OSD data. The OSD that is built into the DJI goggles is not adjustable. They are in fixed locations. This includes the drone battery voltage, flight timer, and goggle voltage in the lower right. And signal strength on the lower left as well as SD card info in the top right.

Anything else you have on the screen is coming from the Betaflight OSD settings which CAN be moved around. Personally the only betaflight OSD info I have added to my display is average cell voltage.

(28-Feb-2021, 07:16 PM)5zero7rc Wrote: The DJI FPV goggles can have two different, independent sets of OSD data.  The OSD that is built into the DJI goggles is not adjustable.  They are in fixed locations.  This includes the drone battery voltage, flight timer, and goggle voltage in the lower right.  And signal strength on the lower left as well as SD card info in the top right.

Anything else you have on the screen is coming from the Betaflight OSD settings which CAN be moved around.  Personally the only betaflight OSD info I have added to my display is average cell voltage.

  
  Thanks,
 Makes sense.
   The 25-50mps bit rate is part of the built in OSD ?

(01-Mar-2021, 07:22 AM)Rob3ddd Wrote: The 25-50mps bit rate is part of the built in OSD ?

Yes.

(01-Mar-2021, 10:26 AM)SnowLeopardFPV Wrote: Yes.

  I wear progressive lens glasses under goggles and the center screen is great along with 4:3 but the lower outer osd data can be difficult to see.
  Does the 25-50mps reflect video signal strength?

(02-Mar-2021, 01:40 PM)Rob3ddd Wrote:   I wear progressive lens glasses under goggles and the center screen is great along with 4:3 but the lower outer osd data can be difficult to see.
  Does the 25-50mps reflect video signal strength?

The Mbps value reflects video signal bandwidth / quality. Pretty much everyone who uses the DJI FPV System uses the bandwidth value to gauge when the video signal is getting weak. Anything in the 5-10Mbps range is really when you need to start to think about turning around and heading back. The signal strength indicator bars are only really useful to warn you to start paying more attention to the bandwidth value, but if you have conditioned yourself to look at that then you may as well switch to just looking at the bandwidth value instead which is much more granular.