Posts: 156
Threads: 21
Likes Received: 2 in 2 posts
Likes Given: 0
Joined: Aug 2023
Reputation:
0 Hello,
Can someone please help me? I have had to reflash my Mobula 7 1s Analog and now need to get it to ELRS 3.0 I having trouble getting ELRS Configurator to Build and Flash. I was getting errors No serial device detected. Now I am getting the error Change Config and try again. It detected that my Mobula 7 has as ELRS SPI Receiver.
I think it means I dont have the correct Target Device Category & the Device. What would those be, please. By the way, how to determine what version of ELRS your Quad has?
I very much appreciate your help.
soky157
• Posts: 156
Threads: 21
Likes Received: 2 in 2 posts
Likes Given: 0
Joined: Aug 2023
Reputation:
0 Thank you, I just reflashed it to BFC 4.50 Now everything is connecting! The only problem I am having is that the Motors Screech when trying to lift off...but doesnt lift off. This is why I went back to BFC 4.3.1 then lost all connectivity.
I know the reasons a quad spazzes out on Arming. But none the things I have fixed this issue.
• Posts: 156
Threads: 21
Likes Received: 2 in 2 posts
Likes Given: 0
Joined: Aug 2023
Reputation:
0 Yes I have the ELRS versions matching. I have some serious motor rotation issues. With a little throttle the quad rotates right and does not lift off.
• Posts: 156
Threads: 21
Likes Received: 2 in 2 posts
Likes Given: 0
Joined: Aug 2023
Reputation:
0 Here is the prob I have had for a long time. In Betaflight Configurator Motors Tab (Reorder Motors) It says Click on the spinning motors .... but none of the motors spin! when I click on them. The same with Motor Direction using Wizard or Individually none of the motors spin when I Select them. It has worked on other Quads but NEVER the Mobula 7 1s. In BFC the Motors are reversed as per Happymodel. In ESC Configurator I reversed them there as well. Is that OK? Mob 7 will still not lift off.
• Posts: 156
Threads: 21
Likes Received: 2 in 2 posts
Likes Given: 0
Joined: Aug 2023
Reputation:
0 If I sent you a Video of the motors spinning at a low speed would you be able to tell the rotation of each and if the props are correct?
• Posts: 156
Threads: 21
Likes Received: 2 in 2 posts
Likes Given: 0
Joined: Aug 2023
Reputation:
0 Thank you. One last question, I never removed the Props and yet air is pushing UP not Down! (explaining why Mob 7 is not lifting off) How could that happen?
•